Tripp Lite SMX1500XLRT2U SmartPro 1500VA 1500W 208V Line-Interactive Sine Wave UPS

Owner's Manual - Page 3

For SMX1500XLRT2U. Series: AG-0071
Also, The document are for others Tripp Lite models: SMX1000RT2U, SMX2200XLRT2U, SMX3000XLRT2UA

PDF File Manual, 120 pages, Read Online | Download pdf file

SMX1500XLRT2U photo
Loading ...
Loading ...
3
Equipment Connection Warnings
Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended.
Do not connect surge suppressors or extension cords to the output of the UPS. This might
damage the UPS and may affect the surge suppressor and UPS warranties.
Battery Warnings
Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe
proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries.
Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS
before performing battery replacement. Use tools with insulated handles. There are no user-
serviceable parts inside the UPS. Battery replacement should be performed only by authorized
service personnel using the same number and type of batteries (Sealed Lead-Acid). The
batteries are recyclable. Refer to your local codes for disposal requirements or visit tripplite.com/
UPSbatteryrecycling for recycling information. Tripp Lite offers a complete line of UPS System
Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at tripplite.com/support/
battery/index.cfm to locate the specific replacement battery for your UPS. The RBC Type can
also be found on the label affixed to the Battery Retention Plate.
During hot-swap battery replacement, the UPS will not provide backup power in the event of a
blackout or other power interruptions.
Do not operate the UPS without batteries.
External Battery Connection Warnings
When adding external battery packs to select models with external battery pack connectors,
connect only Tripp Lite-recommended battery packs of the correct voltage and type. Do not
connect or disconnect battery packs when the UPS is operating on battery power. Visit
tripplite.com/support/battery/index.cfm to locate the supported battery type(s) for your UPS.
Important Safety Instructions
20-10-127- 933184.indb 320-10-127- 933184.indb 3 10/16/2020 11:04:28 AM10/16/2020 11:04:28 AM
Loading ...
Loading ...
Loading ...