Loading ...
Loading ...
Loading ...
18
5) Route the bin control cable up through the switch mount and the capillary ring in the bin
control extension bracket, then using the thumbscrews from the accessory bag, install
the bin control to the switch mount. See Fig. 6.
6) Route the bin control cable through the wire saddles across the bottom of the
compressor base, then up to the control box and through the control box wire grommet
and into the control box. Connect the bin control cable to the K4 bin control connector
(red). See Fig. 7. Note: Be sure the bin control cable is clear of the fan motor, fan blade,
discharge line, crankcase heater, and compressor.
Fig. 6
Fig. 7
• K4 (red) Connector
Mechanical Bin Control
7) Using nylon ties provided in the accessory bag, secure the bin control cable to the wire
bundle leading into the control box.
Switch Mount
Bin Control
Extension
Bracket
Thumbscrews
Bin Control
Thumbscrews
• K4 (red) Connector
Mechanical Bin Control
Control Board
Wiring Diagram
Bin Control Cable
Capillary Ring
Bin Control Cable
Capillary Ring
Bin Control Cable
Loading ...
Loading ...
Loading ...