Loading ...
Loading ...
Loading ...
4
INSTALLATION
INSTRUCTIONS
B Cut one 18¼” x 2½” (464 mm x 64 mm) OPENING
(A)* in the cabinet toe kick.
-- or --
Cut one 18¼” x 2½” (464 mm x 64 mm) OPENING
(B) in the cabinet side or back.
Mount one of the two metal grilles over this opening,
using two screws provided.
C
If you chose to cut an opening in the toe kick - you
must cut another 18¼” x 2½” (464 mm x 64 mm)
OPENING (C)* in the cabinet fl oor.
Mount the second metal grille over this opening.
* IMPORTANT NOTE
When using toe kick opening (A) with opening (C) in
cabinet fl oor: Air must be able to fl ow freely between
these two openings - and not restricted by cabinet
structure or any other obstruction.
A
B
A
B
B
C
B
B
C
DClean housing surface (B) with Isopropyl Alcohol or
Rubbing Alcohol. Remove TAPE STRIPS to reveal
adhesive side of tape from the back side of TRIM
BRACKET (A).
ECenter trim bracket left-to-right at TOP OF
DOWNDRAFT HOUSING (B). Stick trim bracket to
downdraft housing so that FLANGES (C) and (D) are
fl ush with each other.
FCut TRIM SEAL (E) to length: No shorter than
downdraft countertop cutout opening and no longer
than cooktop width.
G Remove tape backing from TRIM SEAL (E). Center
trim seal left-to-right and stick trim seal across both
FLANGES (C) and (D).
F
G
D
E
C
A
B
D
E
PARTS INCLUDED
2 - Metal Grilles
1 - Trim Bracket
1 - Trim Seal
1 - Parts Bag (containing):
4 - No. 8 x 7/8” screws
Loading ...
Loading ...
Loading ...