Loading ...
Loading ...
Loading ...
Positioning and connecting en
11
1. Take the hoses out of the holders.
2. Unscrew and remove all four
transportation securing bolts with a
wrench (WAF 13).
Remove the sleeves. Remove the
mains cable from the holders.
3. Insert the covers. Lock the covers
firmly in place by applying pressure
to the snap-in hooks.
Hose and cable lengths
Connection on left side
or
Connection on right side
Note: If the hose holders are used, the
possible hose lengths are reduced!
Available from dealer/customer
service:
■ Longer supply hose (approx.
2.20 m).
Water inlet
:Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Notes
■
Only operate the washer dryer using
cold mains water.
■ Do not connect the machine to the
mixer tap of an unpressurised hot-
water boiler.
■ Do not use a used supply hose. Only
use the supply hose supplied or one
that was purchased from an
authorised specialist retailer.
■ Do not kink or squash the water
supply hose.
■ Do not alter (shorten, cut through)
the water supply hose (otherwise its
strength is no longer guaranteed).
■ Only tighten the screw connections
by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may become
damaged.
aFP
aFP
aFP
aFP
aFP
aFP
PLQ
FP
PD[
FP
Loading ...
Loading ...
Loading ...