Loading ...
Loading ...
Loading ...
12
How to Assemble Your Light Kit Assembly or Cap
1. Remove one of the three screws in the support
bracket at the bottom of the motor assembly. Retain
the screw for later and slightly loosen the remaining
two screws. (Figure 1)
Figure 1
Figure 2
Figure 3
Motor
Assembly
2. Assemble the light kit to the support bracket using
the two key slots in the light kit. Replace the previously
removed screw and securely tighten all three screws.
(Figure 2)
Light Kit
Light Kit
3. Remove the three screws in the light kit and
retain the screws for later. (Figure 3)
4. If installing the light kit, skip this step.
Assemble the light kit wire cover to the light kit
using the removed screws in step 3 and secure all
three screws.
(Figure 4)
Figure 4
Light Kit
Light Kit
Wire Cover
Connect the 2 single pin connector from the LED
assembly to the 2 single pin connector from motor
assembly. (Figure 5A)
5A. For use with light kit.
5B. For use with steel cap.
Assemble the steel cap to the light
kit
by twisting in a
clockwise direction. (Figure 5B)
NOTE:
If you have installed your fan with the steel cap,
skip Steps 6 and 7.
Figure 5BFigure 5A
Steel Cap
LED Assembly
Light Kit
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
CAUTION
Loading ...
Loading ...
Loading ...