XO XOI3015SMUA User instructions

Loading ...

- 7 -

Installation - Ducting Options

WARNING FIRE HAZARD

NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces,

ceiling, attics or garages.

All exhaust must be ducted to the outside, unless using the recirculating option.

Use single wall rigid Metal ductwork only.

Fasten all connections with sheet metal screws and tape all joints w/ certied Silver

Tape or Duct Tape.

INSTALL THE DUCTWORK:

NOTE: To reduce the risk of re, use only metal ductwork.

1. Decide where the ductwork will run between the hood and the outside.

2. A straight, short duct run will allow the hood to perform most eciently.

3. Long duct runs, elbows, and transitions will reduce the performance of the

hood. Use as few of them as possible.

4.XOI3315S - XOI3315SMUA: Install a roof or wall cap.

Connect 6" round metal ductwork to cap and work back towards hood location.

Use duct tape to seal the joints between ductwork sections.

5.XOI3315KS - XOI4515KS: Install a roof or wall cap. Connect 8" round metal ductwork

to cap and work back towards hood location. Use duct tape to seal the joints

between ductwork sections.

Loading ...

XO XOI3015SMUA 28" x 15" Insert Blower with 3-Speed 395 CFM Blower, Push Button Controls, Halogen Lights