Loading ...
Loading ...
Loading ...
1
3 4 5
2
1
2
12
3
7
13
15
8
17
20
19 18
21
10
11
9
14
16
5
6
4
Preparing Filters
1. Open the air inlet grille and remove the air fi lters.
2. Attach the fi lters. (see detail in the Installation Manual).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Clock Setup
1. Push
by tip of the pencil.
If timer indication is fl ashing, go to the next step 2.
2. Press
or
: adjust the time.
3. Press
: Set the time.
Remote Control Reset
Push
by tip of the pencil or
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
INDOOR UNIT DISPLAY
1
PREPARATION BEFORE USE
2
AIR FLOW DIRECTION
3
Note:
●
The provided Remote Controller is a wireless type, which also can be
used as a wire. Please see “How to Connect The Remote Controller
for Wired Operation”, located in installation instruction, in case of wired
control is required.
●
In wire operation, remote controller will return to initial condition
(PRESET, TIMER and CLOCK will return to initial condition) when user
shutdown power supply of Air conditioner.
REMOTE CONTROL
4
1
Infrared signal emitter
2
Start/Stop button (
)
3
Mode select button (
)
4
Temperature button (
)
5
Fan speed button (
)
6
Swing louver button (
)
7
Set louver button (
)
8
On timer button (
)
9
Off timer button (
)
!
Setup button (
)
"
Clear button (
)
#
Memory and Preset button (
)
$
One-Touch button (
)
%
High power button (
)
&
Economy button (
)
(
Quiet button (
)
)
Comfort sleep button (
)
~
Filter reset button (
FILTER
)
+
Set clock button (
CLOCK
)
,
Check button (
CHECK
)
-
Reset button (
RESET
)
AUTOMATIC OPERATION
COOLING / HEATING OPERATION
6
7
To automatically select cooling or heating operation
1. Press
02'(
: Select Auto A.
2. Press
: Set the desired temperature, Min. 17°C, Max. 30°C.
3. Press
)$1
: Select AUTO, LOW , LOW+ , MED
,
MED+
or HIGH
.
1. Press
02'(
: Select Cool or Heat .
2. Press
: Set the desired temperature, Min. 17°C, Max. 30°C.
3. Press
)$1
: Select AUTO, LOW , LOW+ , MED ,
MED+ or HIGH .
DRY OPERATION
8
For dehumidifi cation, a moderate cooling performance is controlled
automatically.
1. Press
02'(
: Select Dry .
2. Press
: Set the desired temperature, Min. 17°C, Max. 30°C.
Note: Dry mode fan speed is set to Auto only.
1
ECO (White)
2
Wi-Fi access (White)※
3
Hi Power (White)
4
Timer (White)
5
Operation Mode
- Cool (Blue)
- Heat (Orange)
1
Press
),;
: Move the louver
in the desired vertical direction.
2
Press
: Swing the air
automatically and press again
to stop.
3
For horizontal direction, adjust
manually.
Note:
●
Do not move the louver manually by hands or others.
●
The louver may automation positioning by some operation mode.
● Display brightness can be adjusted, follow procedure on #.
※ Require Wireless LAN connecting adapter which available as accessory.
ONE-TOUCH
5
Press the “ONE-TOUCH” button for fully automated operation that is
customized to the typical consumer preferences in your region of the world.
The customized settings control temperature air fl ow strength, air fl ow
direction and other settings to provide you alternate contact with
“ONE
-
TOUCH” of the button. If you prefer other settings you can select from
Press
: Start the operation.
01_OM_1126250217_EN.indd 3 16/2/2564 BE 14:54
the many other operating functions of your Toshiba unit.
Loading ...
Loading ...
Loading ...