Loading ...
Loading ...
Loading ...
Section 2 - OPERATING INSTRUCTIONS
2.3 STOPPING
Stop engine and blade by releasing the blade
control. Stop forward motion of mower by releasing
the wheel drive control.
2.5 CUTTING HEIGHT ADJUSTMENT
1. Pull the height adjusting latch outward and move
to desired cutting height. See Figure 2.5.
2.4 HANDLE HEIGHT ADJUSTMENT
The height of the mower handle can be adjusted as
follows:
1. Loosen the lower nuts on each lower handle as
shown in Figure 2.4.
LOWER
LOWER
I NUTS ON EACH
HANDLE
I-q
rq
._ LATCH
FIGURE 2.5
FIGURE 2.4
2. Set all wheels at the same cutting height. The
highest cutting position is Notch 6. The lowest
cutting position is Notch 1. See Figure 2.6.
3. Tighten the lower nuts on each lower handle to
maintain desired position.
2. Move upper mower handle up or down until the
desired position is achieved.
LATCH
POSITIONS
1
WARNING
Stop engine and mower blade by releasing the blade
control before adjusting cutting height or handle
height.
iii! _!ii!
CUTTING HEIGHT SETTINGS
FIGURE 2.6
Loading ...
Loading ...
Loading ...