Home
Bookmarks
Home
Bosch
Bosch HSB736256E/01 User Manual
Page 2
User Manual - Page 2
For HSB736256E/01.
Page 2/8
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Contents
Table of Contents
Search
Previous
Next
Bookmarks
Loading ...
D
E
$
%
&
'
D
E
F
Loading ...
Loading ...
Loading ...
<
1
2
3
4
5
6
>
File type: PDF
File name: 67548000_hsb736256e-01.pdf
File size: 310.58 KB
File Language: English
Pages: 8
Author: Bosch
File created: 2013-12-05
Published: 2023-10-26
Updated: 2023-10-26
Download File
Table of Contents
×
Safety precautions
3
: Risk of gas escape!
3
Before installing
3
Unpacking
3
Appliance classes - Fig. 1
3
Appliance dimensions - Fig. 2
3
Adjacent units - Fig. 3
3
Rating plate
3
Guidelines for ventilation
4
Note
4
Installation
4
Fitting the adjustable feet - Fig. 4
4
1. Remove all parts that are not permanently fixed, especially the pan supports and burners.
4
2. Remove the accessories from the oven.
4
3. Tilt the appliance by raising it slightly on one side from the floor.
4
4. Screw the adjustable feet into the mounting holes on the underside of the appliance.
4
Note
4
5. Only finally level the appliance when the electricity and gas have been connected, and all of the installation work has been completed.
4
Fitting the splash guard - Fig. 5
4
1. Remove the packaging and the protective film from the splash guard.
4
2. Loosen the two screws on the back of the appliance.
4
3. Place the splash guard into the holes intended for this purpose using the dowels.
4
4. Insert and tighten the bolts from below.
4
Electrical connection
4
Connecting the appliance to the power supply
4
Power cable with a plug with earthing contact
4
Gas connection
4
Gas connection on the appliance
4
Default setting of the burners
4
Gas connecting line with conical thread (EN 10226 R1/2) - Fig. 6a
4
1. Screw the angle (3) and the seal (2) to the gas connection (1)
4
2. Hold the angle (3) with a spanner and screw the adapter piece (5) and the seal (4) to the angle.
4
3. Hold the adapter piece (5) with a spanner and screw it to a fixed connecting line or a flexible gas connecting hose (6).
4
Gas connecting line with cylindrical thread (EN ISO 28 G1/2) - Fig. 6b
4
1. Screw the angle (3) and the seal (2) to the gas connection (1).
4
2. Hold the angle (3) with a spanner and screw it to a fixed connecting line or a flexible gas connecting hose (5) and the seal (4).
4
Flexible hoses - Fig. 7
4
Installing the safety valve
4
Checking for leaks
4
Initial use
4
Converting the gas type
5
Replacing the gas burner nozzles - Fig. 8
5
1. Disconnect the appliance from the electricity supply.
5
2. Remove the pan support.
5
3. Remove the burner cap A and burner cup B from the burner C (Fig. 8a).
5
4. Remove the nozzle D and replace it with an appropriate nozzle for the new type of gas (Fig. 8b).
5
5. Replace the old gas label with the new gas label.
5
6. Place the burner cup B onto the burner C.
5
7. Position the burner cap A exactly on top of the burner cup B (Fig. 8c).
5
8. Refit the pan support.
5
1. Switch on the gas burner.
5
2. Turn the control knob for the gas burner towards the small flame setting.
5
3. Remove the control knob for the gas burner.
5
4. Adjust the internal setting screw until a stable flame is burning correctly.
5
5. Loosen the setting screw to increase the gas flow or tighten it to decrease the gas flow.
5
Note
5
6. Refit the control knob for the gas burner.
5
General nozzle table
5
Note
5
Positioning and levelling
5
Positioning the appliance
5
Adjusting the appliance - Fig. 10
5
Note
5
Search:
×
Search
