Loading ...
Loading ...
Loading ...
The sewn ends of the
harness strap loops
MUST face towards you.
DO NOT twist the harness
strap or the harness
adjustment strap.
Make sure the same
harness strap loops are
fi tted completely on both
sides of the splitter plate.
To return the harness straps to upper shoulder harness slots, follow the steps below to
rethread them.
1. Remove Harness Strap Loops From Splitter Plate & Pull Harness Straps Out of Lower
Shoulder Harness Slots in Body Pillow & Car Seat
If harness straps have been
removed from chest clip &
buckle, rethread them:
The harness strap ends go
through the back of the buckle
tongues & through the chest clip
front to back.
Reclining Car Seat
This car seat has 3 positions.
Rear-Facing Mode - 3 Reclined or 2 Semi-reclined
For children who cannot sit up unassisted, the
Rear-
Facing Level Line
on the car seat MUST be parallel with
the ground using either Position 3 or 2.
For children who can sit up unassisted, you may make the
car seat more upright in Position 2.
Forward-Facing Mode - 1 Upright or 2 Semi-reclined
*
Booster Seat Mode - 1 Upright or 2 Semi-reclined
*
To Recline: Pull out on the recline handle and push the top
of the car seat back.
For More Upright: Pull out on the recline handle and pull
the top of the car seat forward.
*
When used in
Forward-Facing Mode
or Booster Seat Mode,
semi-reclined Position
2 is ONLY to be used if
necessary to install the
car seat fl ush against
the vehicle seat back.
The vehicle seat back
must be upright.
47
48
2. Thread Harness Straps into
Upper Shoulder Harness Slots
in Car Seat
3. From Back of Car Seat,
Thread Harness Straps Over
Metal Bar
4. Attach 1st Harness Strap
Loops to Splitter Plate
sewn
end
Loading ...
Loading ...
Loading ...