Loading ...
Loading ...
Loading ...
10
S E T U P H I K -C O N N E C T P 2 P C L O UD S E R V I C E
1. Enable Hik-Connect P2P on the device.
1) Go to Menu > Configuration > Network > Platform Access.
2) If the Server Address field is blank, check Custom checkbox and type “dev.us.hik-connect.com.”
3) Check the Enable checkbox to display the Service Terms screen.
4) Enter a user-created verification code (6-12 characters, a combination of digits, upper case letters,
and lower case letters).
5) Check the “The Hik-Connect Service will require Internet access. Please read…” checkbox.
6) Click OK. Status will change to “Online” (if all settings are correct).
7) Note the Serial Number and Verification Code shown (for use when registering the NVR in your
Hik-Connect account) or use the QR code displayed.
2. To see a device’s video stream on the Hik-Connect or iVMS-4500 mobile app, add the device.
1) Login to Hik-Connect mobile app with your user name, e-mail, or mobile number and password.
2) Click “+” (upper right corner) on the Home screen.
3) Enter the device’s information.
· If you have device’s QR Code: Use the QR Code Scanner to scan the device’s QR Code.
· If you do not have device’s QR Code: Enter the device information manually:
a. Click Edit (pencil) on top right corner.
b. Enter device serial number (device must be online), then click OK.
10
S E T U P H I K - C O N N E C T P 2 P C L O U D S E R V I C E
( c o n t i n u e d )
c. When the device appears on the “Results” screen, click Add.
d. Enter device’s 6-character Verification Code (all upper case), then click OK.
3. Click Finish.
11
A D D I P C AM E R A S
1. Right click a window in Live View mode to display the menu. Online cameras in the same network
segment will be detected and displayed in the camera list.
2. Select camera and click to add it (using NVR’s IP Camera Activation password that was defined
when the NVR password was defined) or click One-touch Adding to add first two cameras in list of
three or more.
Figure 9, IP Camera Management Interface
IP Camera Management Icons
Icon
Explanation
Icon
Explanation
Edit basic camera parameters
Upgrade the connected camera
Camera disconnected; click icon to
get camera’s exception information
Delete the IP camera
Play connected camera’s live video
Camera connected
!
11
A D D I P C A M E R A S
( c o n t i n u e d )
12
L I V E V I E W
In Live View mode, icons at the upper-right corner of the screen for each channel show the record and
alarm status of the channel for quick reference.
• Alarm (video loss, tampering, motion detection, VCA or sensor alarm)
• Record (manual record, continuous record, motion detection, VCA or alarm triggered record)
• Alarm and Record
• Event/Exception (event and exception information appears at the lower-left corner of the screen)
13
R E C O R DI N G S E T T I N G S
Two record types are introduced in the following section: Instant Record and All-Day Record. For other
record types, refer to the user manual.
Before You Start
Make sure that the disk has been installed. If not, install and initialize a disk.
After rebooting, all the manual records enabled
are canceled.
1. Click Start Recording from the right-click menu.
2. Select Continuous Record or Motion Detection
Record on your demand.
3.
Click
Yes
in the pop
-
up box to confirm
.
q
NVR CAMERA CHANNELS
Cameras connected to NVR
w
PLAY
Play camera’s live video
e
EDIT (Pencil)
Change IP address (in LAN range)
r
CAMERA LIST (White)
Added cameras
t
LAN CAMERAS LIST (Yellow)
Detected cameras will appear here
NOTE: To change camera name, go to
OSD.
q
e
r
t
w
e
14
P L A Y B A C K
The recorded video files and pictures on the hard disk
can be played back in the following modes: instant
playback, all-day playback for the specified channel,
and playback by normal/event/smart/tag/system
logs/sub-periods/external file search/picture.
1. Go to Menu > Playback.
2. Check the channel(s) in the channel list for
playback.
3. Double click a date on the calendar.
4. (Optional) Use the toolbar in the bottom part of
Playback interface to control the playing progress.
5. (Optional) Select the channel(s) to execute
simultaneous playback of multiple channels.
Figure 10, Playback
15
A C C E S S I N G B Y W E B B R O W S E R
You can access the device via Web browser. Use one of the following Web browsers: Internet Explorer 6.0,
Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Internet Explorer 10.0, Apple Safari,
Mozilla Firefox, or Google Chrome. The supported resolutions are 1024*768 and above.
You shall acknowledge that the use of the product with
Internet access might be under network security risks.
For avoidance of any network attacks and information
leakage, please strengthen your own protection. If the
product does not work properly, contact your dealer or
the nearest service center.
1. Open Web browser.
2. Enter the IP address of the device.
3. Press Enter.
4.
Log in to the device.
• If the device has not been activated, you must
first activate the device by setting the admin
user account password.
• If the device is already activated, enter the user
name and password in the login interface, and
click Login.
5. Follow the prompts to install the installation plug-in
before viewing live video and managing the camera.
Close the Web browser to finish the plug-in
installation.
After login, you can operate and configure
the device, including using live view,
playback, log search, configuration, etc.
16
B A C K U P V I D E O R E CO R D I N G S A N D C LI P S
Back up recorded video clips to ensure important video is not lost or destroyed.
• Choose Recorded Video Clips to Back Up
1. Connect a USB flash drive, HDD, or DVD writer to an available USB port (mandatory).
2. Go to Menu > Playback.
3. Select cameras for playback.
4. Select the beginning date and time of the incident.
5. Click START CLIPPING icon.
6. Select the ending time of the incident.
7. Click END CLIPPING icon (same as START CLIPPING). Clip will be marked.
8. Repeat steps 1-6 as many times as required.
9. Click FILE MANAGEMENT icon to display a new window containing all marked clips.
10. Select the desired clips.
11. Click EXPORT to save files to the inserted USB device.
• Lock Video Clips
1. Click on the images of the clips you want to lock.
2. Press LOCK to prevent the file from being erased.
• Back Up Video Clips
1. Connect a USB flash drive, HDD, or DVD writer to an available USB port.
2. Click File Management icon to display the File Management window.
3. In the File Management window, choose video clip(s) to back up and click Export.
4. Choose backup device (USB flash drive, USB HDD, or DVD writer).
5. Click Export (to check backup, choose recorded file in Export interface and click ).
16
B A C K U P V I D E O R E C O R D I N G S A N D C L I P S
( c o n t i n u e d )
q
CAMERA LIST
Select cameras to view
w
CALENDAR
Select dates to view
e
PLAY/STOP
Toggles between Play and Stop
r
START/STOP CLIPPING
Toggles between Start Clipping
and Stop Clipping
t
LOCK
Locks selected video clips to
prevent them from being deleted
y
FILE MANAGEMENT ICON
Displays list of saved clips,
export clips from this window
q
VIDEO CLIPS LIST
Select desired clips to export
w
EXPORT BUTTONS
Save clips to USB device
q
w
e
r
q
w
t
y
QSG ERI-Kxxx-Px 050619NA
Loading ...