Loading ...
Loading ...
Loading ...
Approx. 5mm
1. Determine the position where the mirror needs to
be mounted.
2. Measure the distance between the two mounting
brackets on the back of the mirror.
3. Mark the wall where the screws should be
installed. Use a level to ensure the mirror will be
level. It is recommended that the screws be
installed into a timber cross beam for strength.
Remember to take into account that the
Mirror needs to be moved 10mm to the left
or rig ht to lock i nto position on the screws
when determining where the mounting
screws are installed onto the wall.
4. Drill holes where the wall plugs will be installed
using a drill bit that matches the diameter of the
wall plugs. You do not need to use the wall plugs if
anchoring to timber.
Please check to avoid wires or water pipes
when drilling.
5. Install the wall plugs as required.
6. Install the screws leaving approx. 5mm from the
screw head to the wall.
Ensure the electrical wiring has been installed in the wall to a position behind the mirror
before commencing to install the mirror.
Installation instructions
Loading ...
Loading ...
Loading ...