Loading ...
Loading ...
Loading ...
VII. q - VIEWING SENSOR TEMPERATURES:
These parameters allow a service technician or customer to view the temperature of all sensors within
the unit. The temperatures cannot be adjusted.
Follow the instructions to enter the customer access code on page 10. When the control displays
Thermostat Set Point , press the DOWN arrow key unit the display reads
Cabinet Air Sensor, Evaporator Coil Sensor, and Disharge Line Sensor or
press the SET button . The display will read Thermostat Set Point .
Press the UP or DOWN arrow keys to scroll through the parameters or press the ALARM
CANCEL button to exit.
VII. r - DOOR OPEN ICON:
The door open icon is located on the control face, directly below the Alarm Cancel button (On/Off button
for heated cabinet models). This feature illuminates on all solid and hinged glass door models
1
whenever
one or more of the doors is opened, and stops illuminating upon all doors being closed. There are no
operator adjustable parameters for this feature.
1= This feature is not included on either re-rated or sliding glass door models.
VII. s - HOT FOOD UNITS, ADJUSTING THE THERMOSTAT & TURNING THE UNIT OFF/ON:
This parameter sets the desired cabinet temperature. Please note that hot food units are delivered
from the factory set to the OFF position.
Follow the instructions to enter the customer access code on page 10. When the control reads
Thermostat Set Point, press the set button .
Use the arrow keys to adjust the temperature to your desired setting. When the display
shows the temperature you want press the set button . The display will then read
Thermostat Set Point. You can use the up or down arrow keys to scroll to the
next parameter or press the alarm cancel button to exit.
VII. INTELA-TRAUL
®
(continued)
-18-
)
)
)
S E T
SET
SET
Loading ...
Loading ...
Loading ...