Loading ...
Loading ...
Loading ...
FILL IN DATES
DATES
cC_: BTir::;, eOp:r:: °n _V w
Check Operator Presence and
T Interlock Systems
R Check for Loose Fasteners If V's
Sharped/Replace Mower Blades _3
T Lubrication Chad
0 Check Battery Level
R Clean Battery and Terminals If _ --
Check Transaxle Cooling
Check V-Belts ll_
Check Engine Oil Level I_'
Change Engine Oil (with oil filter) I1_1 If
E Change Engine Oil (without oil filter) Ik_l,_
a Clean Air Filter V_;G Clean Air Screen
NI Inspect Muffler/Spark V'
Arrester
E Replace Oil Filter (If equipped) ik/_.2
Clean Engine Cooling Fins II_'z
Replace Spark Plug _2
Replace Air Filter Paper Cartridge I
Replace Fuel Filter
I - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 * Replace blades more often when mowing _ sandy soil.
4 - Not required it equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft.-rbs, maximum.
DO not overltghten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
19
LUBRICATION CHART
(_ T_eRod Ball Joints
)indle
Zerk Zerk
(_Front Wheel Wheel
Bearing Bearing Zerk
Zerk
Sector
Gear
Teeth
@Engine
OSpray Silicone Lubriant (Move Boots to
Lubricate)
_General Purpose Grease
@Refer to Maintenance "ENGINE" Section
IMPORTANT; Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating
bearings. If you feel they must be lubricated,
use only a dry, powdered graphite type
lubricant sparingly.
Loading ...
Loading ...
Loading ...