Loading ...
Loading ...
Loading ...
8
FINAL INSTALLATION
4. Insert the blade screw through the blade arm, blade and into the screw cap. Tighten each blade screw with a Phillips screwdriver
(not included) starting with the one in the middle. Repeat this step for the remaining blades and blade arms (Figure 5.4).
5. Insert blade arm through slots in the side of the motor assembly. Align the holes of one blade arm with three motor screw holes
in underside of the motor assembly. Secure with three motor screws. Repeat this step for the remaining blade arms (Figure 5.5).
6. Reinsall two of the three previously removed light pan screws onto the light pan. Note: Only tighten the screws half way. Then,
connect the single-pin connector from the fitter plate to the single-pin connector from the light kit -- Blue to Black and White
to White. Align the slotted holes in the light kit with the loosened screws in the fitter plate. Turn light kit clockwise and replace
the previously removed fitter plate screw. Tighten all screws (Figure 5.6).
7. Attach the lens cover to the light kit by twisting the lens cover tightly in a clockwise direction (Figure 5.7).
8. Remove the battery door from the back of the remote using a flat-head screwdriver (not included). Insert the two CR2032
batteries into the remote; ensure the positive pole of the batteries face up (as pictured) and then replace the battery door.
Press the HIGH SPEED button to ensure the LED indicator illuminates and the fan turns on (Figure 5.8).
9. If desired, the wall bracket can be attached to a wall using the mounting screws (Figure 5.9).
Turn on power to fan at breaker box and the wall switch. Assembly is complete.
Figure 5.5Figure 5.4 Figure 5.6
Blade Screw
Screw Cap
Blade Arm
Blade Arm
Motor Screw
Light Kit
Single-pin
Connector
Fitter Plate
Screw
Blade
Figure 5.8 Figure 5.9Figure 5.7
Lens Cover
Light Kit
Battery
Battery Door
Wall Bracket
Mounting
Screw
Loading ...
Loading ...
Loading ...