Loading ...
Loading ...
Loading ...
16
• You should only use the travel mug for the beverages pres-
ent on the homepage.
• To use a travel mug other than the one supplied, make sure
it is no taller than 16 cm.
Important
• Before screwing on the lid, open the closing cap to release
the pressure;
• Recipes with milk: at the end of preparation, clean the
milk carafe (see section “9.6 Cleaning the milk carafe after
use”).
• You should use the contents within a maximum of 2 hours.
After that time, empty and clean as described in the fol-
lowing section.
• For more information, see the leaet attached to the travel
mug.
12.1 Cleaning the travel mug after use
For hygiene reasons, the travel mug (D9) should always be
cleaned after use. Do not use abrasive materials that could dam-
age the surface of the container.
Proceed as follows:
1. Unscrew the lid and rinse the container and lid with hot
drinking water (40°C).
2. Soak the components in hot water (40°C) with wash-
ing up liquid for at least 30 minutes. Do not use scented
detergents.
3. Clean the inside of the container and the lid with a clean
sponge and washing up liquid, removing any visible dirt.
4. Rinse all components with hot drinking water (40°C).
5. Dry all components with a clean, dry cloth or paper towels,
then reassemble.
6. Wash the lid in the dishwasher once a week. The metal
container is not dishwasher safe
13. “MY” FUNCTION (“Hot” beverages only) U
With the “my function”, you can customise the beverage as
follows:
1. Make sure the prole (C6) whose beverage you want to
customise is active;
2. Press (C2) at the bottom of the image corresponding
to the beverage you want to make;
3. Press ;
4. Press “Start” to follow the guided procedure;
5. If envisaged by the beverage, select the desired Aroma and
press “Next”;
6. Press “Brew” to begin preparation;
7. When the required quantity has been delivered into the
cup, press “Stop”.
8. If you are satised with the result in the cup, press “Save”
to save the settings, or “Cancel” to retain the previous
parameters.
9. Press “X” to go back to the homepage.
The appliance goes back to the homepage (C).
Please note:
• If you save the new settings, they are memorised ONLY in
the selected prole.
• When you customise a single beverage, the respective
double version is also customised and the appliance dis-
plays the message “Settings saved on both double and
single recipe”;
• Press “X” to exit programming at any moment. The values
will not be saved.
• When a beverage has been customised, “Reset” (under the
image) and “my” (among the quantity selections) appear
in the settings. Press “Reset” to reset the default values for
the beverage.
Beverage quantity table
Beverage Standard
quantity
Programmable
quantity
ESPRESSO 40 ml 20-180 ml
2X ESPRESSO 40 ml + 40 ml 20-180 ml +
20-180 ml
COFFEE 180 ml 100-240 ml
LONG 160 ml 115-250 ml
DOPPIO+ 120 ml 80-180 ml
AMERICANO 150 ml 70-480 ml
TEA 150 ml 20-420 ml
HOT WATER 250 ml 20-420 ml
14. SELECTING YOUR PERSONAL PROFILE U
You can memorise a number of dierent proles, each associat-
ed with a dierent icon.
The customised beverage settings are saved in each prole. The
order in which all the beverages are displayed is based on the
frequency of selection.
To select a prole, proceed as follows:
1. From the homepage (C), press the prole currently in use
(C6). A list of selectable proles appears;
2. Then select the required prole.
Please note:
• After making your selection, the beverage settings bars
will all appear in the same colour as the prole;
• You can rename your prole;
• To customise the prole icon, see section “6.7 Create and
edit proles”.
Loading ...
Loading ...
Loading ...