Loading ...
Loading ...
Loading ...
User’s Manual
3
3 Installation
Install the Camera in time after unpacking to prevent the camera core from being exposed in
humid environment for a long time.
The installation surface, with certain thickness, needs to be capable of bearing a weight 3 times
of the Camera at least.
Do not tear up or throw away the static cling film on transparent cover, preventing the lens from
damaging, before completing installation and commissioning. Do not touch the cover after
tearing up the film. Make sure that no traces left on the Camera.
This section takes some models as the example. They are for reference only, and may differ from
the actual model.
Installing Camera 3.1
Adhesive tape installation Figure 3-1
Take out the Camera and tear up the 3M adhesive protective film. Step 1
Stick the Camera to the installation surface according to monitoring range. Step 2
Connect the Camera to HCVR. Step 3
Adjust the Camera angle when monitoring image is displayed on HCVR. Step 4
Adjusting Camera 3.2
Adjusting Camera Figure 3-2
Take off the screw cap and loosen the adjusting screw. Make sure that the Camera does not Step 1
Loading ...
Loading ...
Loading ...