Loading ...
Loading ...
Loading ...
Remove blockages
Unblocking the drain pump
If the dishwasher still contains water after the program has finished, something may be blocking the
drain pump, which results in the error message Water outlet fault or BLDC drain pump fault.
1.
Turn off the machine using and remove the plug from the power outlet.
2. Remove the coarse filter and the fine filter.
3. Scoop out the water from the dishwasher tub.
4. In order to inspect the drain pump, remove the yellow drain pump stop on the right in the bottom
drain. (Use a pair of pliers if necessary.)
5. Turn the pump wheel located behind the drain pump stop by hand. Carefully remove any sharp
items, such as glass.
6. Reinstall the drain pump stop along with the fine and coarse filters.
7. Plug the machine in again.
Drain pump stop
NOTE!
Do not forget to reinstall the drain pump stop.
39
Care and maintenance instructions
Loading ...
Loading ...
Loading ...