Loading ...
Loading ...
Loading ...
5 - EN
WWW.SENIXTOOLS.COM
TABLE OF CONTENTS
SAFETY & INTERNATIONAL SYMBOLS ..........................5
SAFETY INSTRUCTIONS ..................................................7
KNOW YOUR UNIT ..........................................................12
SPECIFICATIONS* ..........................................................12
ASSEMBLY ......................................................................12
OPERATION .....................................................................12
MAINTENANCE ...............................................................13
TROUBLESHOOTING .....................................................13
WARRANTY .....................................................................13
SAFETY & INTERNATIONAL
SYMBOLS
Some of the following symbols may be used on this
product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
product better and safer.
SYMBOL NAME DESIGNATION/
EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per
second)
Wh Watt Hour Energy Storage Capacity
Ah Amp Hour Current Capacity
~ Alternating
Current
Type or a characteristic of
current
Class II
Construction
Double-insulated
construction
RPM Rotating
Speed
Revolutions per minute
/min Per Minute Revolutions, strokes,
surface speed, orbits, etc.,
per minute
Wet
Conditions
Alert
Do not expose to rain or
use in damp locations.
Read The
Operator’s
Manual
To reduce the risk of
injury, user must read and
understand operator’s
manual before using this
product.
Eye
Protection
Always wear eye protection
with side shields marked to
comply with ANSI Z87.1.
Safety Alert
Precautions that involve
your safety.
Long Hair
Failure to keep long hair
away from the air inlet could
result in personal injury.
Loose
Clothing
Failure to keep loose
clothing from being drawn
into air intake could result in
personal injury.
Keep
Bystanders
Away
Keep all bystanders at least
50 ft. away.
Blower
Tubes
Do not operate without
tubes in place.
Impeller
Blades
Rotating impeller blades
can cause severe injury.
The power
Always keep the power
cable away from heat
sources, oils or sharp
edges. Immediately remove
plug from the mains if
the cable is damaged or
entangled.
The power
WARNING! Turn the
machine OFF and
disconnect it from the power
supply before inspecting,
cleaning, changing
accessories or conducting
any other maintenance
task.
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER
Indicates an imminently
hazardous situation, which,
if not avoided, will result in
death or serious injury.
WARNING
Indicates a potentially
hazardous situation, which,
if not avoided, could result
in death or serious injury.
Loading ...
Loading ...
Loading ...