Loading ...
Loading ...
Loading ...
5
Speaker Phone
After paired your mobile phone to
WIND 2 with BT, the speaker phone function
can be used.
•
Make call: Call will automatically transfer to the speakerphone. If not, tap
play/pause button;
•
Answer call: Tap play/pause button to answer the incoming call;
•
End call: Tap play/pause button during the call to end the call;
•
Reject call: Hold play/pause button to reject the incoming call;
•
Redial last number: Double tap
play/pause button to redial last number
when it is not in a call.
Charge
When the power is low, a beep will comes out from
the speaker, please charge
the speaker when you hear the beep.
1.
Connect the standard USB end of the supplied USB cable to a USB power
source (like PC, USB power adapter…etc.);
2.
Connect the Micro USB jack to the USB charging port in the unit. The charging
indicator will light up while charging;
3.
It will take about 2
hours to
fully charge the BT speaker;
4.
The
LED indicator will stay on while charging, and goes off after fully charged.
Note: if the unit is not used longer than 7 days, please charge
the unit
for 10 minutes before turn on the unit.
Connection
Laptop / notebook / PC
As the BT versions for these types of devices vary greatly, the connection methods
will differ as well. If you cannot connect with the WIND 2 BT Speaker using the previous
method instructed, you may need to install a new version of the BT driver.
Please refer the instructions of device for details.
Loading ...
Loading ...
Loading ...