Loading ...
Loading ...
Loading ...
8
Fig. 1
Burner cap lip
Burner cap
Correct burner cap
placement
Incorrect burner cap
placement
To prevent are-ups and avoid creation
of harmful by-products, do not use the cooktop without all
burner caps properly installed to insure proper ignition and
gas ame size.
On round style burners, the burner cap lip (See Fig. 1)
should t snug into the center of burner head and rest level.
Refer to Figs. 2 & 3 for correct and incorrect burner cap
placement. Once in place, you may check the t by gently
sliding the burner cap from side to side (Fig. 4) to be sure
it is centered and rmly seated. When the burner cap lip
makes contact inside the center of the burner head you will
be able to hear the burner cap click. Please note that the
burner cap should NOT move o the center of the burner
head when sliding from side to side.
Check and be sure that all oval style (some models) burner
caps are correctly in place on oval burner heads.
Burner head
Fig. 2
Fig. 3
Fig. 4
It is very important to be sure that all surface burner caps
and burner grates are properly installed and in the correct
locations BEFORE operating the cooktop burners.
Remember:
• Always keep surface burner caps in place whenever
using a surface burner.
• When placing the burner caps, be sure that all burner
caps are seated rmly and rest level on top of burner
heads.
• For proper ow of gas and ignition of burners DO NOT
allow spills, food, cleaning agents or any other material
to enter the gas orice port opening.
Check burner cap placement before operating the
surface burners
Before Setting Surface Controls
Do not use the surface burners without the
burner caps and burner grates properly installed. Missing
pieces or improper installation may lead to spills, burns, or
damage to your range and cookware.
Make sure the burner grates are properly placed on the
cooktop before using the surface burners. The grates are
designed to rest inside the recess on the cooktop.
To install burner grates, place grates at-side down and
align into the cooktop recess. Grates should rest ush
against each other and against the sides of the recess.
Installing burner grates
Fig. 5
Loading ...
Loading ...
Loading ...