Loading ...
Loading ...
4
3
The PA speaker can be powered when connected to main power
or using the internal 12V battery.
1.Connect the power cable to the top of the unit.
2.Connect the other end of power cable to main power.
3.Turn on the switch at the main power point.
4.The unit will automatically power on when connected to
main power.
Notes: If you wish to use the internal battery to power the unit, just
simply turn on the Battery switch located on the top of unit to ON.
Charging
Before using the PA speaker for the first time, charge the unit at
least 8 hours.
1.Connect the power cable at the top of the panel.
2.Turn off the battery switch on the top of the panel.
3.Recharge indicator light will be on when it is charging.
Notes: The internal battery will charge while the unit is being
operated and the power switch is on. It is better to charge the unit
while the power switch is off.
You can connect the wired microphone to this unit using the MIC
INPUT located on the top of control panel.
1.Turn off the unit.
2.Connect your wired microphone to the MIC INPUT located on
top of the control panel.
3.Adjust the microphone volume by tuning the MIC VOL/ECHO
knobs located on top control panel.
NOTES: You can use the wired microphone and wireless
microphone at the same time.
You can play music from USB stick or SD Card using the USB/SD
slot on the PA speaker.
1.Turn on the unit.
2. Insert your USB or SD card into the slot.
3. Once inserted the USB or SD card unit will automatically play.
4. You can use the PRE/NEXT/PLAY/PAUSE to control and play music.
NOTES: The speaker system can play the following audio file formats:
MP3,MP4,WMA.The USB/SD Card no more than 32GB. Operation may
be slower when searching large memory files. It will need several
seconds to respond when your USB/SD Card full of contents.
USB/SD Card Playback
Using the Wired Microphone
Turning ON/OFF
Note: Microphone Not Included
Loading ...