Loading ...
Loading ...
Loading ...
CLEANING
USER SERVICING INSTRUCTIONS
3
a) Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on
top of plug towards blades.
c) Remove fuse carefully. Insert the tip of your tool into
fuse slot (close with the terminal), then pry out the fuse
gradually and slowly, but do not overexert. If you feel tight, you can revise it at
several times and pry out the fuse little by little. When one side of the fuse has
been pried up, then you can get the fuse out entirely.
d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
e) Close fuse cover. Slide closed the fuse access cover on top of plug.
f) Risk of fire. Do not replace plug. Contains a safety device (fuse) that should not
be removed. Discard product if the plug is damaged.
Notice:
1. When you replace the fuse, please don’t operate suddenly or overexert, or else
the product will be damaged or cause an accident.
2. When the fan is hard to operate, make sure it is in the upright position.
1. Be sure to unplug the power cord from the outlet before cleaning.
2. Plastic parts should be cleaned with mild soap and damp cloth or sponge.
Thoroughly remove soap film with clean water.
3. Be sure not to get water or other liquid inside of the motor.
Loading ...
Loading ...