Loading ...
Loading ...
Loading ...
Problem Possible Cause Remedy
The tool does not start when
switched on, runs slowly or loses
power during operation.
The battery pack has not been
installed or has a low charge.
Recharge and install the battery
pack.
There is a fault with the battery
pack.
Contact Draper Tools to discuss
replacement options.
The tool ange does not close or
grip the accessory correctly.
Dust, chippings or other
obstructions are present in the tool
ange.
Remove any obstructions from the
tool ange and wipe it clean.
The pins on the tool ange are
damaged.
Contact Draper Tools to discuss
replacement options.
The fuse in the charger plug has
blown.
Replace the fuse.
The battery pack doesn’t charge, or
the charger LED does not
illuminate.
There is a fault with the charger. Contact Draper Tools to discuss
replacement options.
The tool does not perform
eciently.
The tool speed has not been set
correctly.
Test the tool speed on a scrap piece
of material similar to the workpiece
and adjust the speed as
appropriate.
9. Maintenance and Troubleshooting
– 15 –
EN
Important: Maintenance and repairs should be carried
out ONLY by authorised and suitably qualied personnel.
WARNING! ALWAYS ensure that the on/o switch (4) is
in the o (
) position and that the battery pack has
been removed before performing any maintenance on
this product.
9.1 General Maintenance
Important: Only the accessories included with this
product are replaceable by the user. Any other repair or
servicing should be carried out by an authorised Draper
Tools repair agent.
• Use only spare parts supplied by Draper Tools.
• Use this product ONLY with the recommended 12V
range battery pack and charger supplied by Draper
Tools.
− ALWAYS check the ratings plate for compatibility
before use.
• DO NOT expose the tool to rain or wet conditions.
• Keep the tool ange clean and free from obstructions.
• Keep all ventilation points on the tool clean and free
from dust and obstructions.
• Clean the product regularly using a dry cloth.
CAUTION! NEVER use aggressive chemicals to
clean the product as these may damage plastic or
insulated parts.
• ALWAYS remove the battery pack from the tool when
not in use.
9.2 Storing the Multi-tool
• Store the product in a clean and dry location, out of
reach of children.
CAUTION! Prolonged exposure to moisture can
cause the tool to rust and render it unsafe.
• Remove any accessories and close the tool ange
before storage.
• ALWAYS remove the battery before storage.
• When stored for extended periods, charge the battery
periodically to maintain its health.
9.3 Troubleshooting
Loading ...
Loading ...
Loading ...