Loading ...
Loading ...
Loading ...
2. Protect floor when moving refrigerator
with thin 1/4" plywood strips or scrap pieces
of linoleum under wheels. Unplug refrigerator
power cord from its electrical outlet, and then
pull refrigerator away from wall. Position
refrigerator so its back is accessible.
ao
bo
Route copper tube up to refrigerator,
through floor or interior wall behind
refrigerator, whichever is more con-
venient, using 3/8" holes when required.
Put other end of copper tubing into
a sink, or a pail if desired, and open
saddle valve slightly. Keep in mind
that water will be under considerable
pressure. Allow water to run through
copper tubing for several minutes to
flush out saddle valve and copper
tubing. Shut off saddle valve
when flushing is completed.
3. Remove the lower cover from the back of
the refrigerator. See Figure 27. Do not discard
the lower cover; it must be reinstalled after the
ice maker kit installation is completed.
LOWER COVER
Figure 27
Loading ...
Loading ...
Loading ...