Loading ...
Loading ...
Loading ...
English
7
Magnets, Belt Hook and Stand (Fig. A)
CAUTION: When magnets, belt hook or stand is in
use, do not shake light. Personal injury or property
damage may occur.
CAUTION: When light is hung by the magnets, belt
hook or stand, do not shake the light or object that
it is hanging from. Do not hang the light from any
electrical wires or anything that is not secure. Personal
injury or property damage may occur.
CAUTION: Only use the magnets, belt hook or stand
for hanging the LED worklight. The magnets, belt
hook or stand are not intended to support additional
weight. Do not attach or hang anything additional to
the light or risk of breakage may occur.
CAUTION: Do not use the magnets, belt hook or
stand to reach with or use the magnet and belt hook
to support your weight in any situation.
CAUTION: Do not stand underneath a hanging light.
Using the stand
6
, belt hook
7
and magnets
8
, the
worklight can be placed in multiple locations for ideal
lighting.
The stand should be snapped into the home position if not
in use, as shown in FigureA.
Pivoting Head (Fig. E)
The pivoting head provides light in any direction by rotating
180˚ in both directions.
Fig. E
Replacing the Lens (Fig. F)
If the lens becomes damaged, an accessory lens is available
at extra cost from an authorized service center. To replace
the lens, first remove the battery.
1. Remove 2 screws
9
from the bezel
10
.
2. Separate the 2 halves of the bezel.
3. Remove the lens
5
.
4. Attach the new lens, reattach the 2 halves of the bezel
and secure in place with screws. Do not overtighten.
Fig. F
9
10
10
5
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source remove the battery pack before
making any adjustments or removing/installing
attachments or accessories.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performingthis.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into aliquid.
Accessories
WARNING: Since accessories, other than those
offered by
DEWALT, have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only DEWALT
recommended accessories should be used with
thisproduct.
Recommended accessories for use with your tool
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact
DEWALT Industrial
Tool Co., 701East Joppa Road, Towson, MD 21286, call
1-800-4-DEWALT (1-800-433-9258) or visit our website:
www.dewalt.com.
Repairs
The charger and battery pack are notserviceable.
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement) should
be performed by a
DEWALT factory service center
or a DEWALT authorized service center. Always use
identical replacementparts.
Register Online
Thank you for your purchase. Register your product nowfor:
Loading ...
Loading ...
Loading ...