Loading ...
Loading ...
Loading ...
Installation instructions en
27
Installing an intermediate floor
1.
If you are installing a hob above the appliance, in-
sert an intermediate floor.
2.
Ensure that the intermediate floor has a clearance of
at least 10mm from the appliance.
Note:The intermediate floor can only be removed us-
ing the suitable tool.
20.5 Installation in a tall unit
Observe the installation dimensions and the safety
clearances in a tall unit.
¡ Ensure that the intermediate floor has a gap to the
installation wall in order to ventilate the appliance.
¡ If the tall unit has another back panel in addition to
the element back panels, this must be removed.
¡ Only fit the appliance up to a height which allows
accessories to be easily removed.
20.6 Installing two appliances on top of
each other
Your appliance can also be installed above another ap-
pliance.
20.7 Electrical connection
In order to safely connect the appliance to the elec-
trical system, follow these instructions.
¡ The fuse protection must correspond to the power
rating specified on the appliance's rating plate and
to local regulations.
¡ The appliance corresponds to protection class I and
must only be operated with a protective earth con-
nection.
¡ The appliance must be disconnected from the
power supply whenever installation work is being
carried out.
¡ Contact protection must be ensured by the installa-
tion.
¡ Only a licensed professional may connect appli-
ances without plugs. They are subject to the require-
ments of the local electricity provider.
Loading ...
Loading ...
Loading ...