GE - General Electric PB975DT1BB GE electric range

User Manual - Page 34

For PB975DT1BB.

PDF File Manual, 88 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Cleaning the glass cooktop, tonsomemode/s)
Clean Four cooktop after each
spill, Use CERAMABRYTE®Ceramic
Cooktop Cleaner.
Normal Daily Use Cleaning
ONLYuse CERAMABRVTE® Ceramic Cooktop
Cleaner on the glass cooktop. Other creams
may not be as effective.
To maintain and protect the surface of gout
glass cooktop, follow these steps:
[]
Before using the cooktop for the
first time, clean it with CERAMABRYTE®
Ceramic Cooktop Cleaner.This helps
protect the top and makes cleanup easier.
r_ Dailg use of CERAMABRYTE®Ceramic
Cooktop Cleaner will help keep the
cooktop looking new.
@
Shakethe cleaning cream well. Applg a
few drops of CERAMABRYTE®Ceramic
Cooktop Cleanerdirectlg
to the cooktop.
r_ use a paper towel or CERAMABRYTE®
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface,
r51 use a drg cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is vetF important that gou DO NOT
heat the cooktop until it has been cleaned
thoroughlg.
Use a CERAMA BRYTE® Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
NOTE: DAMAGE to Four glass surface maF
occur if Fou use scrub pads other than those
recommended.
r_ Allow the cooktop to cool.
[] Spread a few drops of CERAMABRYTE®
Ceramic Cooktop Cleaneron the entire
burned residue area.
%
Using the included CERAMABRY1-E®
Cleaning Padfor Ceramic Cooktops, rub
the residue area, applging pressure as
needed.
%
@
If ang residue remains, repeat
the steps listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAIVlABRYTE®
Ceramic Cooktop Cleaner and a paper
towel.
The CERAMABRYTE® Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts
Center. See instructions under "To
Order Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
%
Allow the cooktop to cool.
Use a single-edge razor blade scraper
at approximatelg a aS° angle against
the glass surface and scrape the soil. It
will be necessarg to applg pressure to
the razor scraper in order to remove
the residue,
%
After scraping with the razor scraper,
spread a few drops of CERAMABRYTE®
Ceramic Cooktop Cleaner on the entire
burned residue area. Usethe CERAMA
BRYTE®Cleaning Padto remove ang
remaining residue.
%
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMABRYTE®
Ceramic Cooktop Cleaner and a paper
towel.
34
Loading ...
Loading ...
Loading ...