Broan BDF302SS BDF Series 30-Inch Under-Cabinet Range Hood, 530 Max Blower CFM

Installation Guide - Page 3

For BDF302SS. Series: BDF
Also, The document are for others Broan models: BDF*

PDF File Manual, 12 pages, Read Online | Download pdf file

Loading ...
Loading ...
3
Please take note this manual uses the following symbols to emphasize particular information:
NOTE: Indicates supplementary information needed to fully complete an instruction.
TABLE OF CONTENTS
Choose where the ductwork will run between the hood and outdoors.
A straight, short duct run will allow the hood to perform most efficiently.
Long duct runs and elbows will reduce the performance of the hood. Use as few of them as possible.
Install proper-sized ductwork, elbow(s) and roof or wall cap for the type of discharge chosen. Use 2’ metal foil duct tape to seal joints.
WARNING
!
Identifies an instruction which, if not followed, might cause serious personal injuries including possibility of death.
CAUTION
Denotes an instruction which, if not followed, may severly damage the unit and/or its components.
1. INSTALL DUCTWORK
HH0144A
ROOF CAP
WALL CAP
ADJUSTABLE
ELBOW
ADAPTER/
DAMPER
26” MINIMUM ABOVE
COOKING SURFACE
(28” FOR GAS RANGE)
HH0145A
WALL CAP
ADAPTER/DAMPER
26” MINIMUM ABOVE
COOKING SURFACE
(28” FOR GAS RANGE)
VERTICAL DISCHARGE
USING 6” ROUND DUCT
HH0146A
ROOF CAP
WALL CAP
ADJUSTABLE
ELBOW
ADAPTER/
DAMPER
EAVES CAP
26” MINIMUM ABOVE
COOKING SURFACE
(28” FOR GAS RANGE)
VERTICAL DISCHARGE
USING 3¼” X 10” DUCT
HORIZONTAL DISCHARGE
USING 3¼” X 10” DUCT
NOTE: We recommend to install the hood at a minimum of 26’ from an ellectric range fand at 28” from a gas range. For optimal
performance, the hood should not be installed more than 30” from cooking surface.
ABOUT THIS MANUAL
1. I NSTALL DUCTWORK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2. P
REPARE THE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
3. P
REPARE THE HOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
4. INSTALL THE HOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
5. CONNECT WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
6. LIGHT BULBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
7. C LEANING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
8. OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
9. WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
10. SERVICE PAR TS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
11. WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Loading ...
Loading ...
Loading ...