1
65
2
7
3
8
4
9
trimmer head. The first time using the eyebrow attachment
comb, it is better to start with the longest setting to see what
length works best.
2. Slide the track of the blade into the chosen slot on the eyebrow
attachment comb by following the direction of the arrow. The
eyebrow attachment comb should slide in easily, otherwise it
may be misaligned.
3. Slide the eyebrow attachment comb until you feel it fasten. The
entire length of the blade should be covered.
CAUTION: Do not insert the vertical blade or any other foreign
object into the inner ear. For hair growing on the outside of the ear,
simply move the vertical blade slowly along the edges of the ear.
CLEANING YOUR TRIMMER:
Periodically after use, turn the trimmer “OFF” and rinse both
cutting heads under warm, running water. For more thorough
cleaning, remove the attached cutting head by turning it slightly
counterclockwise. Then rinse the entire head under running water.
After cleaning, replace desired cutting head by turning slightly
clockwise and wipe the entire trimmer dry with a soft cloth. Always
replace the protective cap before storing.
NOTE: Do not submerge detailing head
blades under water. Press the release button
downwards (See Fig. C) to remove the top
plastic housing and brush it out thoroughly.
USING THE CONTOUR TRIMMER/
SHAVER:
A 5-position trimming guide makes achieving a
consistent trim easy, every time. The guide can
be removed (providing a sixth cutting position).
To attach the guide, simply slide it on. To
remove the guide, slide the assembly away
from the trimmer. Adjust the trimming length
by moving the comb forward or backward to the desired setting.
1. Comb bikini hair. Combing your bikini hair in the direction
that it grows will help reveal stray hairs and achieve an even,
INSTALLATION/ REMOVAL OF
TRIMMING HEADS
Make sure trimmer unit is turned “OFF”.
1. Turn trimmer head counterclockwise
1/4 turn and lift off.
2. Place trimmer head on trimmer and
turn trimmer head clockwise 1/4 turn
to lock on.
TRIMMING BIKINI AREA:
For detailing the bikini area, slowly move the detailing attachment
on the outside of the bikini area to trim and shape until desired look
is accomplished.
TRIMMING TOES:
For trimming hair on toes, slowly move the defining trimmer with
the grain of the hair.
TRIMMING ARM HAIR:
Simply glide the defining trimmer over arm until desired “look” is
achieved.
TRIMMING EYEBROWS:
Trimming with detailing head, place eyebrow
attachment comb over it. (See Fig. A) The
attachment comb allows you to trim and
shape eyebrows. Trim by following in the
direction of hair growth.
NOTE: Only use on eyebrows. Be cautious
around the eye area. Dots molded on the
detailing head attachment and on the eyebrow
attachment may not always line up straight
with dots. The eyebrow attachment comb has
two settings; approximately 2mm (S) and 4mm (L). (See Fig. B)
The settings will create very short lengths to create a thin brow.
1. Choose the desired length. The shortest is nearest to the comb
and the longest is the furthest. NOTE: Be advised that you must
align the dots for the settings with the dot on the detailing
SPECIAL FEATURES:
Your trimmer has been designed with several advanced features to
help you get perfect results every time you trim. Your trimmer may
be used to neatly trim the bikini area, toes, arms and eyebrows, or
anywhere you may need grooming.
SAVE THESE INSTRUCTIONS
For Household Use Only
RECHARGING
1. This trimmer is conveniently designed for household use. It
should be allowed to charge overnight before first use.
2. Remove the trimmer, recharging transformer and accessories
from the packing material.
3. Connect the transformer to the trimmer. BE SURE TRIMMER IS
IN THE “OFF - 0” POSITION WHEN CHARGING.
4. Plug the recharging transformer into any convenient electrical
outlet at the correct voltage.
5. When trimmer is low in power, it should be connected to the
transformer and plugged into an outlet to assure maximum
power is available when it is next used. This transformer
is designed to continuously charge the battery without
overcharging.
6. Ni-Cad battery life may be extended with the following
procedure: Once every month, let the trimmer run until the
motor stops. Move the switch to the “OFF - 0” position and
recharge fully overnight.
CARING FOR YOUR TRIMMER
OILING BLADES
For best results, use Wahl Clipper Oil on the blades only when
necessary, or approximately once a month. Motor bearings are
permanently lubricated—do not
attempt to oil.
When oiling your trimmer, turn the
trimmer “ON - I,” hold the unit with
the blades facing DOWN and squeeze
three drops across the front of the
blade and one drop on each side on the heel of the blade. Wipe off
excess oil with soft cloth.
NOTICE—DO NOT OVER OIL!
Excessive oiling or application of liquids will cause damage if
allowed to seep back into motor.
BLADE CARE
Trimmer blades have precision-hardened, ground and lapped
cutting teeth. Blades should be handled carefully and never bumped
or used to cut dirty or abrasive material. Never rinse the blades with
water, or the blades may rust. Clean with the included brush.
CLEANING/STORAGE
Before storing your trimmer, use the cleaning brush to whisk any
loose hairs from the unit and the blades. For units with a soft-touch
grip, use a damp cloth to wipe down the body of the trimmer,
taking care not to get the blades wet. Store unit in such a manner
so that blades are protected from damage.
When the trimmer is not in use, the trimmer blade guard
attachment should be in place to protect the blades.
This appliance should be stored in a manner where it is not
subjected to crushing, heating above 100°C (212°F), or
incineration.
RECYCLE/REPLACEMENT
OF NI-CAD BATTERY
Do not mix old and new batteries. Do not mix alkaline, standard
(carbon-zinc), or rechargeable (Ni-Cad, Ni-MH, etc.) batteries.
Under normal use, the rechargeable nickel-cadmium batteries in
your trimmer may last up to five years. At the end of their life, when
they will no longer take a full charge, the nickel-cadmium batteries
must be removed and recycled or disposed of properly. Do not
attempt to replace the batteries. All servicing or battery replacement
should be performed by an Authorized WAHL Service Location. To
remove the battteries for recycling or disposal, follow these steps:
1. Unplug transformer from outlet, disconnect cord from trimmer
and allow the batteries to completely run down before
disassembly.
2. Remove any attached trimming heads.
3. Pry open grip pad.
4. Remove all 3 screws from top cover
plate.
5. Pry the trimmer housing
apart.
TROUBLESHOOTING
If your trimmer does not seem to take a charge, check the following
before returning it for repair:
1. Check outlet current by plugging in another appliance.
2. Make sure the outlet simply is not connected to a light switch
which turns the power at the outlet off when lights are turned
off.
3. Be sure the trimmer is properly connected to the recharging
transformer, all connections are secure and the switch on the
trimmer is turned “OFF - 0.”
4. If your electricity is connected to a master power switch, we
suggest the trimmer be disconnected from the charger anytime
the master switch is off. Leaving the unit plugged into a dead
outlet or an unplugged charger will drain the battery.
5. If trimmer does not run and it is completely charged, turn the
unit “ON - I” and pinch or push the blades manually. (Oil may
have dried out between the blades, so they may be temporarily
stuck together.)
balanced bikini trim.
2. Volume reduction. Attach the 5-position guide comb and select
a long trimming length. Begin trimming your bikini area, starting
with the top and working down. Use closer setting to get the
“look” and length you desire.
3. Defining. As a finishing step, use the trimmer without the
attachment to make a definitive line around bikini area. For a
more definitive bikini outline, use the detail head.
For the closest look
, simply attach
the shaver head. The shaver makes for the perfect
tool to groom the total body. Using the same
technique, as mentioned prior, you can groom
wherever you feel a need. Shave against hair growth
while stretching the skin. After every use, remove
the shaver foil by pulling shaver head up and
carefully using cleaning brush provided.
Operating Instructions for
Rechargeable Body Trimmer
Instrucciones para Operar la
Recortadora Recargable
para Su Cuerpo
WahlUSA.com
© 2018 Wahl Clipper Corporation
Part No. 91609-1701
Printed in China
For more information or Product Registration, visit WahlUSA.com
3-YEAR LIMITED WARRANTY
Valid in U.S.A. Only
If your Wahl product fails to operate satisfactorily within three (3)
years from the date of original purchase or receipt as a gift, Wahl
will, at our option, repair or replace the product and return it to
you FREE OF CHARGE. Do not return this product to store where
purchased. Products needing repair under this warranty should
be returned with postage pre-paid to the following address or call
1-800-767-9245 for assistance:
Wahl Clipper Corp.
Attn: Repair Department
3001 Locust Street
Sterling, Illinois 61081
When mailing, please include a note describing the defect and
the date of original purchase or receipt as a gift. Products out of
warranty will be repaired at our standard repair charges.
This warranty does not cover products damaged by:
1. Modification or repair by anyone other than Wahl Clipper
Corporation or a Wahl authorized service center;
2. Commercial (non-consumer) use or unreasonable use.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. No other written
express warranty is given. No responsibility is assumed for
incidental or consequential damages of any type or for the use
of unauthorized attachments. Some states may not allow the
exclusion or limitation of incidental or consequential damages, so
the limitation may not apply to you. Warranty valid in U.S.A. only.
Outside U.S.A., check with store for Wahl authorized distributor’s
warranty.
Pure Confidence
™
CONTAINS SEALED, RECHARGEABLE
NICKEL-CADMIUM BATTERY. MUST BE
RECYCLED OR DISPOSED OF PROPERLY.
The RBRC Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery
contained in this product indicates Wahl is voluntarily participating in an
industry program to collect and recycle these batteries at the end of their
useful life, when taken out of service in the United States or Canada. The
RBRC program provides a convenient alternative to placing used Ni-Cd
batteries into the trash or the municipal waste stream, which is illegal in some
areas. Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling
in your area. Wahl’s involvement in this program is part of our commitment to
preserving our environment and conserving our natural resources.
SERVICE AND REPAIR
If you have problems with your trimmer, send it prepaid with a note
explaining the problem to:
Wahl Clipper Corporation
Attn: Repair Department
3001 Locust Street
Sterling, IL 61081
Telephone (800) 767-9245
For products purchased outside the United States, contact your distributor.
If for any reason within 60 days of purchase of your Wahl
®
trimmer you are not satisfied with your trimmer and would like a
refund, just return your trimmer, together with the sales receipt, to
the retailer from whom you purchased it. Wahl will reimburse all
retailers who accept trimmers within 60 days of purchase. If you
have any questions regarding this money-back guarantee, please
call 1-800-767-9245 in the United States.
60 Day Money Back Guarantee!
On/Off
Switch
Trimming
Head
Shaving
Head
Detail
Head
Storage Pouch
Eyebrow
Attachment
Comb
5-Position
Guide
Cleaning
Brush
Comb
Blade
Oil
Loading ...
Loading ...
Loading ...
