Loading ...
Loading ...
Loading ...
Quick Start Guide
9
EMX5 Owner’s Manual
Using the Built-in Effects
It is possible to add particular sound effects or effects that simulate the sound of different per-
formance environments, such as concert halls and small clubs.
1. Use the [PROGRAM] rotary encoder to select the desired effect.
q Turn the [PROGRAM] rotary encoder to select the program.
w The selected effect program number flashes in the display.
e Press the [PROGRAM] rotary encoder to confirm your selection.
2. Turn on ( ) the FX RTN [FX ON] switch.
The switch lights up to indicate that it is on. Connect a control device such as the optional FC5 foot switch (sold separately)
to the [FOOT SW] jack, which lets you conveniently bypass/enable the built-in effects.
3. Set the FX RTN [LEVEL] control to the “ ” position.
4. Use the [AUX2/FX] send controls to adjust the effect depth for each channel you wish to apply
the effect.
5. Use the FX RTN [LEVEL] control to adjust the overall effect depth.
Display
NOTE
• You can also select and confirm the program by simultaneously holding down and turning the [PROGRAM] rotary encoder.
• If no operation is detected for an extended period of time, and the selected program is not confirmed, the system will auto-
matically return to the previously confirmed program.
• For details about available effects, refer to the “Effect Programs” on page 17.
t
NOTE
If you wish to change effect parameters such as reverb time or delay time, adjust the [PARAMETER] control. (See section !8
on page 10.) For details about the parameters of each effect that can be adjusted with the [PARAMETER] control, refer to the
“Effect Programs” on page 17.
Loading ...
Loading ...
Loading ...