Loading ...
Loading ...
Loading ...
4
Installation
Note:
1. The video port that is on the same side of the unit as the USB Micro-B port is the
only port that will transmit EDID information to the connected computer. Connect
the monitor whose EDID information you wish to use to this port.
2. The B155- and B157-Series splitters allow for displaying video in Clone / Mirror
mode only, in which the same image is displayed on both screens. You will not be
able to display video in Extended mode across multiple screens.
1. Make sure the power to all devices you are connecting is turned off prior
to installation.
2. Connect the built-in DisplayPort or Mini DisplayPort cable to the
computer’s video output port.
3. Connect the included USB Micro-B cable between the unit and a USB
port on the computer or a USB wall outlet.
4. Connect the monitor whose EDID information you wish to be used to the
video output port on the same side of the unit as the USB Micro-B port
using an appropriate video cable.
Note: The cable length between the splitter and the monitor must not exceed
16 ft. (5M).
5. Connect a second monitor to the remaining video output port using an
appropriate video cable.
Note: The cable length between the splitter and the monitor must not exceed
16 ft. (5M).
6. Turn on the power to the source and displays. The Orange LEDs next to
each video output port will illuminate to indicate that the unit is powered
on and transmitting a signal to the connected monitors.
15-09-203.indd 4 9/25/2015 11:10:03 AM
Loading ...
Loading ...
Loading ...