Loading ...
Loading ...
Loading ...
EW-DX EM 2 rack receiver
136
Ch 1 / Ch 2 -> Scan / Auto Setup menu item
The receiver lets you scan the frequency spectrum and display
all of the free frequencies in the selected frequency range. The
automatic frequency setup can be used to distribute the free
frequencies to all of the EW-DX EM 2 devices available in the
network automatically.
▷Switch off all transmitters before you perform the scan.
If transmitters are still switched on, they are detected as
unavailable frequencies and the frequencies that are actu-
ally available cannot then be used.
To perform the automatic frequency setup for all devices in
the network, the Auto Setup function must be enabled in the
receiver’s system menu: "System -> Auto Setup menu item".
To open the Scan / Auto Setup menu item:
▷In the menu, navigate to the Scan / Auto Setup menu item
for the desired channel.
▷Press the jog dial to open the menu.
The following view is displayed:
▷Turn the jog dial to choose between the Scan Me and Scan
Network options.
•Scan Me: The frequency scan and the frequency setup
are performed only for the selected receiving channel.
•Scan Network: The frequency scan and the frequency
setup are performed for both channels of the receiver as
well as for all other receivers available in the network.
Loading ...
Loading ...
Loading ...