LHT2240CFF User Manual

Loading ...

INSTALLING / REMOVING BATTERY PACK

WARNING: Make certain the lock-off button is engaged to

prevent switch actuation before removing or installing battery.

TO INSTALL BATTERY PACK:

Insert battery pack into tool until fully seated and an audible click

is heard (figure 2). Make sure battery pack is fully seated and fully

latched into position.

TO REMOVE BATTERY PACK: Depress

the battery release button in the back of the

battery pack and pull battery pack out of tool.

STATE OF CHARGE INDICATOR

(FIGURE 2a)

The battery is equipped with a state of

charge indicator. This can be used to

display the current level of charge in the

battery during use and during charging.

It does not indicate tool functionality and

is subject to variation based on product

components, temperature and end-user

application.

CHECKING STATE OF CHARGE DURING

USE (FIGURE 2b):

•Press the state of charge indicator button

(B1).

 •ThefourLED’s(B2) will illuminate

indicating the percent of charge in

the battery. See chart in figure 2b.

 •IfLEDlightdoesnotilluminate,

charge battery.

ASSEMBLY INSTRUCTIONS

ASSEMBLY TOOLS REQUIRED (NOT SUPPLIED):

- Phillips Screwdriver

ATTACHING GUARD AND BAIL HANDLE TO TRIMMER

WARNING: Only use with

handle and guard properly

assembled to hedge trimmer. The

use of the hedge trimmer without the

proper guard or handle provided may

result in serious personal injury.

The trimmer is shipped with the guard

and bail handle attached to the trimmer

with a plastic zip tie.

To assemble to trimmer:

• Cuttheplasticziptie.

• Removethesixscrewsthatare

partially run into the trimmer

housing (figure 3).

• Slidetheguardontothefrontofthe

trimmer housing.

• Inserttwoofthesixscrewsintothe

openings on the side of the guard

and tighten securely as shown in

figure 4.

• Slidethebailhandleontothefront

of the trimmer housing behind the

guard.

• Inserttheremainingfourscrews

into the openings on the side of the

bail handle and tighten securely as

shown in figure 5.

<18%

18% - 45%

45% - 72%

72% - 100%

Loading ...

User Manual - Page 8