Loading ...
Loading ...
Loading ...
10 20V 1.5AH/2.0AH/4.0AH BATTERY
OPERATING INSTRUCTIONS
2. Low Capacity Warning
If one LED on the power indicator begins to ash, the battery pack’s charge is under 20%
capacity and should be recharged.Unlike other types of battery packs, lithium-ion battery
packs deliver fadefree power for their entire run time. The tool will not experience a slow,
gradual loss of power as it is used. The power delivered to the tool will drop quickly when
the battery pack is at the end of its run time and needs to be charged. It is not necessary to
completely discharge the battery pack before recharging.Remove the battery pack from the
tool and recharge it when it is convenient or when it is not in use.
3. Over-temperature Warning
The battery circuitry also protects the battery pack from over heating. To protect the battery
pack from damage and prolong its life, the battery pack circuitry will send a warning signal
to the tool if the temperature becomes too high during use. All power indicators will stay
RED to warn of the over-temperature condition. This may happen in extremely high torque,
binding, and stalling situations. The battery pack will begin normal operation after it has
cooled down
NOTICE: A signicantly reduced run time after fully charging the battery pack indicates that
the batteries are near the end of their usable life and must be replaced.
4. Cold Weather Operation
When the battery pack is very cold, the performance may be weakened. Put the battery
pack on a tool and use the tool in a light application for a while to "warm up" the battery
pack or place the battery pack under room temperature for conditioning. The battery pack
will operate normally.
Loading ...
Loading ...
Loading ...