Loading ...
Loading ...
Loading ...
INSTALLATION MANUAL
INSTALLATION
10
NON-DUCTED INSTALLATION ONLY
5 ] Remove 2 screws from top of hood (see illustration below). Keep the screws for further use.
RECIRCULATION
COVER PLATE
SCREWS
6 ] Remove the Electrical Power Cable Knockout from top (vertical wiring) or back (horizontal
wiring) of hood. Install an appropriate strain relief, 1/2” diameter (not included).
7 ] Remove the 3 screws retaining the recirculation cover plate (shaded part in illustration
below) to the hood. Discard this plate with its screws.
ELECTRICAL
POWER CABLE
KNOCKOUT
SCREWS
Loading ...
Loading ...
Loading ...