Lexmark XM7155 User's Guide PDF Lexmark XM7100 and XM7200 Series

Loading ...

Ordering supplies

To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark

authorized supplies dealers in your area. In other countries or regions, go to

www.lexmark.com or contact the

place where you purchased the printer.

Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-party

supplies or parts may aect the performance, reliability, or life of the printer and its imaging components. Use

of third-party supplies or parts can

aect

warranty coverage. Damage caused by the use of third-party supplies

or parts is not covered by the warranty. All life indicators are designed to function with Lexmark supplies and

parts, and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage

beyond the intended life may damage your Lexmark printer or its associated components.

Estimated number of remaining pages

The estimated number of remaining pages is based on the recent printing history of the printer. Its accuracy

may vary signiﬁcantly and is dependent on many factors, such as actual document content, print quality settings,

and other printer settings.

The accuracy of the estimated number of remaining pages may decrease when the actual printing consumption

dierent

from the historical printing consumption. Consider the variable level of accuracy before purchasing

or replacing supplies based on the estimate. Until an adequate print history is obtained on the printer, the

estimated cartridge yield is based on approximately 5% coverage per page.

Ordering a toner cartridge

Notes:

• The estimated cartridge yield is based on approximately 5 percent coverage per page.

• Extremely low print coverage for extended periods of time may negatively aect actual yield.

Item Return Program cartridge

Toner Cartridge 24B6020 (XM7155, XM7163, XM7170, XM7263)

24B6826 (XM7270)

Ordering a maintenance kit

To identify the supported fuser type, view the label on the fuser. Do either of the following:

• Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen

on the front of the fuser.

Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.

Extended exposure to light may cause print quality problems.

• Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of

the fuser.

Maintaining the printer 251

Loading ...

Lexmark XM7155