Loading ...
Loading ...
Loading ...
11
INSTALLING & CLEANING REUSABLE
CLOTH FILTER
INSTALLING & CLEANING FOAM WET
FILTER
4
1 3
2
Installing Reusable Cloth Filter
1. Verify that the power cord is disconnected from the outlet.
2. Remove power head and place in upside down position.
3. Slide reusable cloth lter down over the lter cage making sure the cage is completely covered.
(Fig. 1 & 2)
4. Replace the power head onto the collection tank.
Removing and Cleaning Reusable Cloth Filter
1. With the removed power head in an upside down position, carefully remove the reusable cloth
lter from the lter cage. (Fig. 3) Clean the lter by gently tapping or brushing dirt off. Cleaning
should not be done indoors in living areas.
2. Use a mild soap and water solution to wash reusable cloth lter and rinse with clean water.
(Fig. 4)
3. Allow the wet lter to air dry for 24 hours before installing onto the lter cage.
1 2
3
4
Installing Foam Wet Filter
1. Verify that the power cord is disconnected from the outlet.
2. Remove power head and place in upside down position. Follow instructions to remove cloth
lter in the section above.
3. Carefully slide foam wet lter down over the lter cage making sure the cage is completely
covered. (Fig. 1 & 2)
4. Replace the power head onto the collection tank.
Cleaning Foam Wet Filter
1. With the removed power head in the upside down position, carefully remove foam wet lter.
(Fig. 3)
2. Use a mild soap and water solution to wash foam wet lter and rinse with clean water. (Fig. 4)
3. Allow lter to air dry before installing and using again.
Loading ...
Loading ...
Loading ...