Loading ...
Loading ...
Loading ...
40
6) "GM" LED and "COMP" LED are on. Open the spout cover slightly. See Fig. 21.
"GM" LED and "COMP" LED turn off within 10 seconds and the control board sounds a
9 beep alarm. Close the spout cover.
7) Move the power switch to the "OFF" position, then turn off the power supply.
Note: The control board alarm resets when power is turned off.
8) Replace the spout spring in its correct position.
9) Replace the control box cover and top panel in their correct positions.
10) Turn on the power supply. Make sure the control switch is in the "ICE" position, then
move the power switch to the "ON" position to start the automatic icemaking process.
11) Replace the front panel in its correct position.
Fig. 21
Spout Cover
Spout
Loading ...
Loading ...
Loading ...