1
Operation Guide 5632
MA1907-EA
© 2019 CASIO COMPUTER CO., LTD.
Rotate the Crown towards you to
set the day.
Push the Crown back in on a time
signal to resume timekeeping.
To change the day indicator setting
To adjust the time setting
Pull the Crown out to Click 1.
Push the Crown back in.
Rotate the Crown to change the
time setting.
When the second hand is at
12 o’clock, pull the
Crown out to
Click 2.
Note
x
Take care that you set the correct AM
or PM time.
x
When changing the time, move the
minute hand four or fi ve minutes past
your fi nal setting, and then back it up
to the setting you want.
Note
x
The day indicator setting uses a 31-
day month. Make adjustments for
months of shorter lengths.
x
Avoid changing the day indicator
setting between the hours of 9
p.m. and 1 a.m. Otherwise, the day
indicator may not change correctly at
midnight.
Stopwatch functions
Crown Operations
Some water-resistant models (100 meters, 200 meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull
the crown out. Avoid applying undue force when pulling.
The watch loses its water resistance while the crown is
unscrewed. After performing a crown operation, fully screw
the crown back in.
Crown
Loosen
If your watch has a rotary bezel...
You can rotate the bezel to align its
▼
mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the
▼
mark.
Start
Elapsed time
Current
Low Battery Alert
x
The second hand will jump at two-second intervals to alert you when the charge is low.
x
Have the battery replaced as soon as possible after low battery alert is indicated.
x
Stopwatch operation is disabled during low battery alert.
x If low battery alert occurs during a stopwatch operation, the stopwatch will
automatically reset to all zeros and stop.
x Be sure to keep all user documentation handy for future reference.
x Your watch may differ somewhat from the one shown in the illustration.
Day Indicator
30
Second Hand
Stopwatch Minute Hand
Hour Hand
24-Hour Hand
Minute Hand
B
A
Crown
Click 2
Click 1
Stopwatch Second Hand
Specifi cations
Module No.
Accuracy at normal
temperature (per month)
Battery type
Battery life
(30 minutes stopwatch
operation per day)
5632 ±20 seconds SR920SW Approx. 3 years
Stopwatch: Measuring Capacity: 29'59" (30 minutes)
Measuring Unit: 1 second
Measurements: Elapsed time; split time; two fi nishes
Other: Low battery alert
Specifi cations are subject to change without notice.
Perform the following procedure if the stopwatch hands do not return to their 0 (zero)
positions when you reset the stopwatch.
Correcting the 0 Positions of the Hands
Pull the Crown out to Click 2.
Use A (clockwise) and B (counterclockwise) to move the
Stopwatch Second Hand
and
Stopwatch Minute Hand
to 12 o'clock.
x Holding down either button will move the second hand at high speed, until you
release the button.
x The
Stopwatch Minute Hand
is syncronized with the
Stopwatch Second Hand
.
After all of the hands are the way you want, push the Crown back in.
Important!
x
Timekeeping stops while the crown is pulled out. Correct the current time setting
after performing the above operation.
Using the Stopwatch
Important!
x
Do not operate the stopwatch with the crown pulled out.
Note
x
An elapsed time operation will stop automatically at the end of 30 minutes.
The stopwatch measures elapsed time in 1-second increments up to 29minutes,
59seconds.
Elapsed time
A
A
A A
B
Start Stop Resume Stop Reset
Split time
A
B
B A
B
Start Split Split release Stop Reset
Two fi nishes
A
B
A B
B
Start Split
First runner
fi nishes.
Display time of
fi rst runner.
Stop
Second runner
fi nishes.
Split release
Display time of
second runner.
Reset
