Loading ...
Loading ...
Loading ...
8
8.0 User-maintenance
Always disconnect power to
the machine before performing maintenance.
Failure to do this may result in serious personal
injury.
Perform the following on a regular basis:
Empty chip drawer.
Clean out dust or debris from inside the cabinet,
with brush or shop vacuum. Do NOT use
compressed air, which can force metal debris
into working parts of the machine.
Inspect and clean the exhaust filter. To access
filter, remove the 6 screws from the exhaust
cover and remove cover. Loosen the hand
knobs on the inside of the cover and slide out
the filter.
Replace filter if needed.
Inspect power cord; have damaged or worn
cord replaced before operating dust collector.
8.1 Additional servicing
Any additional servicing should be performed by
authorized service personnel.
9.0 Optional accessories
The following accessories are available for the JDC-
500B and are ordered separately.
414851 Replacement filter
414852 3” Hose Clamps (2 pcs)
414853 2” Hose Clamps (2 pcs)
414854 Caster Set (4 pcs)
414825 3” to 2-1/2” Reducer sleeve
414820 3” to 2” Reducer sleeve
414815 3” to 1-1/2” Reducer sleeve
10.0 Replacement Parts
To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to
5:00 p.m. CST. Having the Model Number and Serial Number of your machine available when you call
will allow us to serve you quickly and accurately.
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET.
Some parts are shown for reference only, and may not be available individually.
Loading ...
Loading ...
Loading ...