Loading ...
Loading ...
Loading ...
Aboutthe temperaturecontrols, gecom
The temperature controls are preset in the factory at5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
PerformanceAk FlowSystem
The Pettbm_ance :Mr How System is designed to maximize temperature control in the reliigerator and
fl'eezer compartments. This unique spedal feature consists of the _di" Tower ah)ng the back wall of the
reiiigerator and the _dr Tunnel on the bottom portion of the fl'eezer rear wall. Placing fi_od in fl'ont of the
h)tl\'e_ on these components will not affect pe_kmnance. _dthough the _dr Tower and the _dr Tunnel can
be removed, doing so will affect temperature perfkmnance. (For removal instructions, on-line, 24 horus a
day, contact us at ge.com or call 800.(;E.(:ARES. In Canada, contact us at _vw.geappliances.ca or call
1.800.361.3400.)
Loading ...
Loading ...
Loading ...