Loading ...
Loading ...
Loading ...
Automatically searches and adds available channels to the memory.
Select "ANT in" _ Select a scanning mode (p. 15)
_#_Select "Cable" or "Antenna"
or select "Not used" (p. 15).
_2_Select "Auto program"
Settings are made automatically
® After the scanning is completed, select "Apply".
(see below _).
® All previously saved channels are erased.
Use this procedure when changing the channel setup or
changing the channel display.
Also, use this to add or skip channels from the channel list
manually.
You can select a channel tuning mode (Digital only/Analog
only) in "Channel surf mode"(p. 27)
_i_ Select "Edit"
_2_Select the item to edit
Favorite
Caption Add
¼
R G
_ Proceed to
next page
Go backtothe previous
page
** Caption:
Changes the station identifier
** Favorite:
Registers channels to the
Favorite List
** Add:
Adds or skips channels
set
D_B
UBB
or
HDD
m
RETURN
Select or edit the station identifier.
(maximum 7 characters available)
_ Favorite
select
:i set
Set favorite I Select the number
® Add
Press OK to select "Yes (add)" or "No (skip)" RETURN
@ Move the cursor to a channel number
To cancel the Edit
@ Select "Apply"
Check the signal strength if interference is found or freezing occurs on a digital image.
U m Q ® if the signal is weak, check the antenna.
U B B if no problem is found, consult your local dealer.
(_change
HDB or
channel
intensity ¢_ Not available if "Cable" is selected in "ANT in" (see above).
® Available only for digital antenna channels.
® If "Lock" (p. 34) is activated and "ANT/Cable setup" is selected, "Enter password." will be displayed. O/
r.
tc p58_6o_s2_eng_O587.indb 37 2010/03/23 14:26:5',
I
Loading ...
Loading ...
Loading ...