Loading ...
Loading ...
Loading ...
www.PyleUSA.com
5
Step 3
Step 4
Step 5
Remove the bridge gently from the violin.
Mark the New bridge: Use a pencil or other marking tool to add 4 light
marks where the 4 strings sit on the top of the new bridge.
• The width should be wide enough so that when you are playing on
only one string the bow won't produce noise from adjacent strings.
• The width should also be narrow enough so that, when you are playing
on two strings at the same time, you can use one nger to press on
both these two strings without much diculty.
• Suggested horizontal distance between adjacent strings is 9-12mm.
Adjust it based on your nger width. You can also use your old bridge
as a guide for where to make marks if you please.
Place the new bridge between the center of the f-holes of your violin.
• Put the strings on your new bridge, align them with the marks you
made in step 4.
Loading ...
Loading ...
Loading ...