Loading ...
Loading ...
Loading ...
15
EN
5
Wi-Fi (Wi-Fi Model Only)
Enables connection of the air conditioner to
the home Wi-Fi.
NOTE
• Follow instructions on ThinQ application
on how to connect to your unit.
6
Clean Filter
The Clean Filter LED lights up to notify you
that the filter needs to be cleaned. After
cleaning the filter, press Temp
and
together on the control panel to turn off the
Clean Filter light.
NOTE
• The filter reset must be done using the
control panel, not the remote control.
• This feature is a reminder to clean the
air filter for more efficient operation.
The LED light turns on after 250 hours
of operation.
7
Temperature Control
The thermostat monitors room
temperature to maintain the desired
temperature. The thermostat can be set
between 60 °F–86 °F (16 °C–30 °C).
Press or arrows to increase or
decrease temperature setting.
8
Demand Response
The Demand Response LED lights up to
notify you that the appliance operates in
Demand Response mode, in other words,
DR mode. The Demand Response function
can control energy usage or delay the
operation of some functions to save energy
during peak usage periods.
NOTE
• DR Off (Override) - Press Timer button
and Fan Speed button together to
override the Demand Response (DR)
function.
NOTE
• Auto Restart : If the air conditioner turns
off due to a power outage, it will restart
automatically once the power is restored, with
the same settings as were set before the unit
turned off.
• Energy Saver : The unit defaults to the Energy
Saver mode each time the unit is switched on
except in Fan mode or when power is restored
after an electrical power outage.
• The remote control will not function properly if
the AC infrared sensor is exposed to direct light
or if there are obstacles between the remote
controller and the air conditioner.
Loading ...
Loading ...
Loading ...