INSTALLATION
COMPONENTS LEGEND
63165, 63166 v1 07/21
AT
WARNING
RISK OF ELECTRIC SHOCK
- DO NOT USE IN WET LOCATIONS
- USE INDOORS ONLY
- TURN POWER OFF BEFORE SERVICING –
SEE INSTRUCTIONS
- PROPERLY GROUND FIXTURE
- ENSURE THAT NO BARE WIRES ARE EXPOSED
OUTSIDE THE ELECTRICAL CONNECTIONS
RISK OF INJURY
- SOME METAL PARTS IN THE FIXTURE MAY HAVE
SHARP EDGES. TO PREVENT CUTS AND SCRAPES,
WEAR GLOVES WHEN HANDLING THE PARTS.
- DO NOT OPERATE THE UNIT WITH A MISSING OR
DAMAGED LENS
- ACCOUNT FOR SMALL PARTS AND DESTROY
PACKAGING MATERIAL AS THESE MAY BE
HAZARDOUS TO CHILDREN
- WALL MOUNT ONLY
THANK YOU FOR YOUR PURCHASE!
Like our product?
Leave a review on your favorite
retailer website or amazon.com
Having problems?
Let us know how we can help.
Call 1-800-654-8483 between
7AM-8PM, M-F, Central Time.
Discover more
innovative lighting at
byjasco.com/lighting
Instructions made easy
Scan code or visit byjasco.com/63165i
Read instructions or watch
easy-to-follow video.
For deals, to register your purchase
and to tell us how we’re doing,
simply scan the code or visit
byjasco.com/deals
Quick Start Guide
Congratulations on your new Sconce light by
Enbrighten! Blending old-world décor with a clean
and modern style, this lamp will enhance your space
with premium illumination. Before installing, read
through these instructions and take note of any
safety warnings.
You don’t need special tools to install this fixture. Be sure to follow the
steps in the order given. Under no circumstances should a fixture be hung
on house electrical wires, nor should a swag type fixture be installed on
a ceiling, which contains a radiant type heating system. If you are unclear
how to proceed, consult a qualified electrician. NOTE: Proper wiring is
essential for the safe operation of this fixture.
MADE IN CHINA
Distributed by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 2-year limited warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM-8PM, M-F, Central Time.
100%
recyclable
Separate
paper
from plastic
before
recycling
byjasco.com/recycle
paper made from 25%
post consumer waste
Sconce Light
Carefully remove the fixture from the packaging and check that
all parts are included as shown in the figure. Be careful not to
misplace any of the included screws or parts that are needed to
install this fixture.
1. Turn power OFF
Ensure power is turned OFF at the circuit breaker or fuse box.
2. Install mounting bracket
Secure the mounting bracket (C) onto your wall’s junction box
with the included mounting screws (F).
3. Neutral and live wires
Using the wire nuts (B), connect the white fixture wire to the
white (neutral) supply wire from the junction box. Then connect
the black fixture wire to the black (live) supply wire from the
junction box.
4. Ground wire
Connect the ground wire from the junction box and ground wire
from the fixture with a wire nut or the ground screw (E) on the
mounting bracket (C).
5. Secure wiring
Wrap electrical tape (not included) around the wire nuts (B) to
ensure they are secured. Then, gently arrange all wiring inside the
junction box, making sure there are no exposed connections.
6. Attach canopy
Align the canopy (G) with the pre-installed screws (D) on
mounting bracket (C) and fasten it into place using the two
cylinder nuts (H).
7. Install glass shades
Unscrew the socket rings (J) and hold the glass shades (I) in place
with the larger openings facing upwards. Then, carefully screw
each socket ring back into place — ensure the rounded ends are
facing away from the fixture and not contacting glass.
8. Insert bulb
Thread the included T bulb into the socket. Note: Use medium
base 60W MAX incandescent bulbs or 60W equivalent SBCFL or
SBLED bulbs as an alternative.
9. Restore power
With the fixture properly installed, restore power at the circuit
breaker or fuse box and turn the light on using the associated
in-wall switch.
A B C D F G H
J
I
E
A. Junction box (not included)
B. Wire nuts (x3)
C. Mounting bracket
D. Pre-installed screw/nut (x2)
E. Grounding screw
F. Mounting screw (x2)
G. Canopy
H. Cylinder nut (x2)
I. Glass shade
J. Socket ring
FOR YOUR SAFETY
WARNING: BE SURE THAT ELECTRICAL POWER TO THE WIRES YOU ARE
WORKING ON IS SHUT OFF AT THE CIRCUIT BREAKER OR FUSE BOX.
CLEANING
To clean this fixture, wipe it with a soft and dry cloth. Do not use abrasive
materials such as scouring pads or powders, steel wool or abrasive paper.
4007817
CAUTION - RISK OF FIRE
PRECAUCION -
RIESGO DE INCENDIO
MAX 60 WATTS TYPE A
120 60HZ AC ONLY
MADE IN CHINA
MAX 60 WATTS TIPO A
120V 60Hz EXCLUSIV
AMENTE PARA CA
HENCO EN CHINA
Loading ...
