Loading ...
Loading ...
Loading ...
Conventional Cruise Control
148
●Automatic cancellation by the system
Under the following conditions, a notification
sounds 1 short beep and 1 long beep and the
cruise control function is automatically can-
celed. (Conventional Cruise Control indi-
cator) changes from green to white. Also, an
interruption screen is displayed on the combi-
nation meter display.
After the conditions listed below have been
resolved, perform the cruise control set opera-
tion again to reactivate cruise control.
• The select lever is moved to a position
other than “D” or “M”.
- Conventional Cruise Control can be resumed after the select lever is returned to the “D”
or “M” position.
• Vehicle speed drops to approximately 16 mph (25 km/h) or less (due to a steep uphill
grade or some other reason).
• The X-MODE is turned on (the X-MODE indicator illuminates). (if equipped)
- Conventional Cruise Control can be resumed after the X-MODE is turned off.
• Vehicle speed increases to approximately 100 mph (160 km/h) or more.
• Vehicle Dynamics Control or Traction Control Function is activated.
• Any door (except the rear gate/trunk) is opened.
• The driver’s seatbelt is unfastened.
• The electronic parking brake is applied.
• The EyeSight system has a malfunction. (EyeSight warning indicator: Yellow)
Page 154
• The steering wheel is turned significantly in either direction.
• The grade of the road is very steep.
• The Pre-Collision secondary braking is activated.
• The accelerator pedal was depressed continuously for a long time.
• The engine speed increased to a high rpm.
H00460
White
B2632BE-A.book 148 ページ ２０２２年１２月２３日 金曜日 午前９時１１分
Loading ...
Loading ...
Loading ...