Loading ...
Loading ...
Loading ...
Frequently Asked Questions
71
Water intake fault
Problem Possible cause and solution
The dishwasher stops
working shortly after
the program starts.
The alarm tone is
sounding.
The / indicator
light flashes on and off.
and 173 appear alter-
nately on the time dis-
play.
The water supply is turned off.
Open the shut-off valve all the way.
The dishwasher stops
during a program.
The alarm tone is
sounding.
The / indicator
light is flashing.
The fault number or
appears in the dis-
play.
Before remedying the fault:
Turn the dishwasher off with the button.
Water-intake fault.
Open the shut-off valve all the way and start the
program again.
Clean the water-intake filter (see “Cleaning the wa-
ter-intake filter” under “Cleaning and care”).
The water-connection pressure is lower than
7.25psi (50kPa).
Seek professional advice.
The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Water drainage” under “Installa-
tion”).
The dishwasher stops
during a program.
Fault number8 ap-
pears in the time dis-
play.
A technical fault has occurred.
Turn off the dishwasher.
Close the shut-off valve.
Contact Miele Customer Service.
Loading ...
Loading ...
Loading ...