Loading ...
Loading ...
Loading ...
USING THE VACUUM CLEANER
Plug the cleaner into a socket and press on/off button. Care must be taken not to trap the mains
cable under or in doors etc. during use.
TAKING CARE OF YOUR VACUUM CLEANER
EMPTYING THE DUST CONTAINER
Empty the dust container when either the dirt inside the dust container has reached the ‘MAX’ mark
or if the suction has reduced in power.
1. Switch off the vacuum cleaner and disconnect the plug from the main socket. To do this,
always pull on the plug and not on the cable.
2. Release the dust container by pressing down the dust container release button.
3. Lift the dust container forwards away from the vacuum cleaner body.
4. When emptying the dust container hold it over a dust bin.
5. Press the dirt release clip / emptying clip to allow the base to open and the contents to fall
into the bin.
6. Carefully knock any remaining dust loose into the bin.
7. Close the base.
8. While holding down the dust container release button, place the container back onto the
vacuum cleaner body.
9. Make sure the dust container is securely attached back on the cleaner body and release the
button to lock into place.
10. Plug the cleaner back in and resume cleaning.
Don't forget to register for your 12 month guarantee at www.vytronix.com
using product code brandnew-vytronix-hsv3
Loading ...
Loading ...
Loading ...