User Manual Conair CNRGI300 ExtremeSteam 1875 Watt Pro Steam Iron

Documents for Conair CNRGI300

The following documents are available:
User Manual Photos
CNRGI300 photo
EXTREME
STEAM
TM
WITH
NANO TITANIUM SOLEPLATE
Instruction Booklet
For your safety and continued enjoyment
of this product, always read the instruction
book carefully before using.
All GI300 Models
IMPORTANT SAFETY
INSTRUCTIONS
When using your iron,especially when children
are present, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING
DANGER
Any appliance is electrically
live even when the switch is off.
To reduce the risk of death by electric shock:
1. Always unplug appliance immediately
after use and before cleaning.
2. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
3. Do not place in, or drop into water or other
liquids.
4. Do not reach for an appliance that has fallen
into water. Unplug immediately.
5. Use only in a dry area.
WARNING
To reduce the risk of
burns, electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in.
2. This appliance is not a toy and should not
be used by children.
3. Close supervision is necessary when this
appliance is used near children or individuals
with certain disabilities. Unsupervised use could
result in fire or personal injury.
4. Use this appliance only for its intended
use as described in this manual. Do not use
attachments not recommended by Conair.
5. Always position iron carefully to prevent
it from falling if ironing board is accidentally
moved or cord is pulled. Always rest the
appliance upright on its heel rest, on a stable
surface, when not in use.
6. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, or if it has been dropped or
damaged, or dropped into water. Do not
attempt to repair the appliance. Incorrect
reassembly or repair could cause a risk
of fire, electric shock, or injury to persons
when the appliance is used. Return the
appliance to an authorized service center
for examination and repair.
7. Do not allow cord to contact heated surfaces.
Do not pull or twist cord. Let appliance cool
completely before emptying or putting away.
Wrap the cord loosely around the iron when
storing.
8. This appliance has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to
defeat this safety feature.
9. Never drop or insert any object into any
opening.
10. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
11. We recommend you do not use an
extension cord to operate this appliance. If an
extension cord is absolutely necessary, a 15
ampere rated cord should be used. Cords rated
for less amperage may overheat. Care should
be taken to arrange the cord so that the cord
cannot be pulled or tripped over.
12. Surfaces of this appliance are hot when in
use. Do not let heated surfaces touch eyes or
skin.
13. Do not place the soleplate directly on any
surface or on the appliance power cord while it
is hot or plugged in.
14. Unplug this appliance and allow to cool
before filling or emptying the water reservoir
and when the appliance is not in use.
15. Do not operate steamer without properly
filling the water tank with water.
16. The iron should always be turned off before
plugging in or unplugging from an outlet. Never
yank cord to disconnect from outlet; instead,
grasp plug and pull to disconnect.
17. Burns could occur from touching hot
metal parts, hot water, or steam. Use caution
when turning a steam iron upside down to
empty water, as there may be hot water in the
reservoir.
18. If you need to clean the iron, unplug and
allow to cool. Use a slightly damp cloth and
wipe down the outside of the iron. DO NOT use
cleaning agents or place the iron in water or
cleaning fluids.
19. Do not hold hand in front of steam.
20. To reduce likelihood of circuit overload, do
not operate another high-wattage appliance on
the same circuit.
21. Never steam or iron clothes you, or
someone else, are wearing.
22. When emitting steam, this appliance may
cause burns if it is used too close to the skin
or eyes, or if it is used incorrectly. To reduce
the risk of contact with hot water emitting from
the steam vents, test appliance before use by
holding it away from the body.
SAVE THESE
INSTRUCTIONS
IMPORTANT
FOR HOUSEHOLD USE ONLY
DO NOT let children or untrained persons use
the appliance without supervision.
NEVER immerse the iron, cable or plug in any
liquids.
DO NOT leave the hot iron touching fabrics or
very inflammable surfaces.
DO NOT leave the appliance unnecessarily
plugged in. Disconnect the plug from the outlet
when the appliance is not being used.
NEVER touch the appliance with wet or damp
hands.
DO NOT use the power cord or the appliance in
order to pull the plug out of the socket.
DO NOT leave the appliance exposed to the
weather (rain, sun, etc.).
DO NOT leave the iron without supervision when
it is connected to the power supply.
DO NOT fill the reservoir with water before
removing the plug from the socket.
PLEASE NOTE!
Do not use chemical additives, scented
substances or decalcifiers. Failure to comply
with the above-mentioned regulations leads to
the loss of warranty.
OPERATING
INSTRUCTIONS
PREPARING FOR FIRST USE
Before first use, remove all labels from the
soleplate and housing. Turn the iron on, allow to
heat up, then turn the iron off.
Sort the laundry to be ironed according to the
international symbols on the garment label, or if
this is missing, according to the type of fabric.
1. The tank can be filled with ordinary tap water.
Distilled or demineralized water is preferred.
a. Using a clean measuring cup, slowly fill the
tank until the water reaches the Max
indicator.
DO NOT OVERFILL.
b. Wipe off any water that may have spilled
on the outside of the iron with a soft clean
cloth.
2. Set the iron on a stable, flat surface. We
recommend using a quality ironing board
as the pressing surface. Be sure to give
yourself enough room to maneuver the
iron when pressing.
3. Plug the iron into a receptacle. Make sure that
no other high-wattage appliances are plugged
into the same circuit.
4. Once the iron heats up, it is ready to use.
5. After use, turn iron off, unplug, and let the
iron cool for 10 minutes before putting it
away.
GENERAL INSTRUCTIONS
When using the iron for the first time, you may
notice a slight emission of smoke and hear
some sounds made by the expanding plastics.
This is quite normal and it stops after a short
time. We also recommend passing the iron over
an ordinary cloth before using it for the first
time.
ANTI-CALC SYSTEM
A special resin filter inside the water reservoir
softens the water and prevents scale buildup on
the plate. The resin filter is permanent and does
not need replacing.
Please Note:
DO NOT use chemical additives, scented
substances or decalcifiers. Failure to comply
with this regulation leads to the loss of
warranty.
ANTI-DRIP SYSTEM
With the Anti-Drip System, you can perfectly
iron even the most delicate fabrics.
Always iron these fabrics at low temperatures.
The plate may cool down to the point where
no more steam comes out, but rather drops
of boiling water that can leave marks or
stains. In these cases, the Anti-Drip System
automatically activates to prevent vaporization,
so that you can iron the most delicate fabrics
without risk of spoiling or staining them.
DRY IRONING
To iron without steam, leave the steam selector
on position “0”.
SPRAY FUNCTION
Make sure that there is water in the reservoir.
Press the spray button slowly (for a dense
spray) or quickly (for a vaporized spray).
WARNING: For delicate fabrics, we recommend
moistening the fabric beforehand using
the spray function, or putting a damp cloth
between the iron and the fabric.
To avoid staining, do not use the spray on silk
or synthetic fabrics.
CLEANING
Please Note: Before cleaning the iron in any
way, make sure that the appliance plug is not
connected to the outlet.
Any deposits or starch residue left on the
plate can be removed using a damp cloth or a
nonabrasive liquid detergent after it has cooled.
Avoid scratching the plate with steel wool or
metallic objects.
The plastic parts can be cleaned with a damp
cloth, then wiped over with a dry cloth.
SELF CLEANING
The self-cleaning feature cleans inside the plate,
removing impurities. We recommend using it
every 10–15 days. Directions:
ill the reservoir up to the maximum level
indicated and set the steam selector to “OFF”.
et the thermostat knob to the maximum
temperature and wait for the light to turn off.
Pull the plug out of the socket and hold the
iron horizontally over the sink.
old the self-clean button setting until all
the boiling water, steam, and impurities
come out.
hen the soleplate has cooled down, you
may clean it with a damp cloth.
HOW TO STORE
isconnect the plug of the iron from
the socket.
eave the iron to cool down completely.
mpty the water reservoir by turning the
iron upside down over a sink and gently
shaking it.
Always put the iron away in a vertical position.
GET TO KNOW YOUR EXTREME STEAM
TM
1875 WATT IRON
(MODEL GI300)
Nozzle spray
Reservoir door
Water
tank
1875 watts
Temperature
control dial
Steam dial
Steam burst button
Temperature
ready light
Self-clean
button
Nano Titanium soleplate
Maximum
filling level
Water spray
button
LIMITED ONE-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your
unit free of charge for 12 months from the date
of purchase if the appliance is defective in
workmanship or materials.
To obtain service under this warranty, return the
defective product to the service center listed
on back that is nearest you, together with your
purchase receipt and $12.00 for postage and
handling. California residents need only provide
proof of purchase and should call
1-800-3-CONAIR for shipping instructions. In the
absence of a purchase receipt, the warranty
period shall be 12 months from the date of
manufacture.
ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 12-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or
limitation of special, incidental, or consequential
damages, so the above limitation may not apply
to you.
This warranty gives you specific legal rights, and
you may also have other rights, which vary from
state to state.
Service Centers
Conair Corporation Conair Corporation
Service Department Service Department
150 Milford Road 7475 N. Glen Harbor Blvd.
East Windsor, NJ 08520 Glendale, AZ 85307
For information on any Conair product, call
1-800-3-CONAIR or visit us on the web at
www.conair.com
Please register this product at
www.conair.com/registration
©2018 Conair Corporation
East Windsor, NJ 08520
Glendale, AZ 85307
Made in China
18PA050536
IB-15506
Loading ...
Summary of Contents for Conair CNRGI300: